... lubrication mechanical contact minimisation vibrations Cam mechanisms can trace a variety of paths [( 3 )] but are not preferred because of the involvement of higher kinematic pairs. Rigid-body linkages with only hinges are the traditionally accepted path generating choices. A four bar...

... Algorithm ,” Ph.D. thesis, North Carolina State University, Raleigh, NC. 04 06 2011 29 09 2011 09 12 2011 09 12 2011 durability gears mechanical contact optimisation ease-off microgeometry multi-objective optimization hypoid gears spiral bevel gears...

... mechanical contact recess action RA worm gear drive double-depth teeth kinematic error average contact ratio instantaneous contact teeth tooth contact analysis Few of gears, such as indexing gears, are applied to transmit precise control of angular motion. Some of indexing gears usually...

... 24 06 2011 07 09 2011 07 09 2011 blades blanking computerised numerical control design engineering gears geometry mechanical contact optimisation shapes (structures) spiral bevel and hypoid gears face cone element interference ease-off topography tooth contact...

... method, frequency spectrums of the transient and steady states of the calculated transmission errors are obtained to enable the gearbox designer to avoid the resonance zone. elastic deformation fast Fourier transforms finite element analysis friction gears impact (mechanical) mechanical contact...

... of Nonlinearities in a Single-Nut, Preloaded Ballscrew ,” ASME J. Mech. Des. , 119 , pp. 15 – 19 . 10.1115/1.2828782 04 04 2010 04 04 2011 18 05 2011 18 05 2011 assembling design engineering drives elastic deformation fasteners mechanical contact miniature ball screw...

... across surfaces of small curvature, reduced forces on constraining members, and no-slip pure rolling provided by either connecting links or flexures, without the need for gear teeth or friction. 30 12 2009 01 01 2011 22 02 2011 22 02 2011 couplings kinematics mechanical...

... gears mechanical contact rolling friction 02 05 2010 10 11 2010 10 01 2011 10 01 2011 2011 American Society of Mechanical Engineers ...

... 2009 27 04 2010 09 06 2010 09 06 2010 gears mechanical contact wear hypoid gears ease-off topography loaded tooth contact surface deviations Hypoid gears used in various high-volume automotive applications are subject to various manufacturing errors and heat...

... industries machining mechanical contact sliding friction tooth profile gear drive sliding coefficient mathematical model meshing theory Gears are widely used in many types of machinery to transmit power from one axis to another. For a gear drive, one of the key factors affecting its dynamic...

... 22 04 2010 22 04 2010 gears mechanical contact milling optimisation The optimization of the tooth flank topography is an increasingly strategic stage in hypoid and spiral bevel gear design process due to the increasing demand from both automotive and aerospace industries...

... of coast side As mentioned above, we compared the analyzed tooth contact pattern with experimental one and consequently confirmed the same results. 17 06 2009 10 02 2010 13 04 2010 13 04 2010 coordinate measuring machines gears mechanical contact polynomials...

... cutter head for spiral bevel gear, http://www.klingelnberg.info/en/produkte/arcon.php 06 08 2009 26 11 2009 22 03 2010 22 03 2010 blades gears mechanical contact transmission helical gears face-hobbing method cycloidal tooth contact analysis Because...

... (objective function), and constraints be defined. 19 06 2009 20 10 2009 31 12 2009 31 12 2009 acoustic noise gears mechanical contact optimisation vibrations Noise and vibration has been a major concern in the design of gear systems and transmissions, as not only...

.... H. , and Tong , S. H. , 2009 , “ A New Gerotor Design Method With Switch Angle Assignability ,” ASME J. Mech. Des. 0161-8458 , 131 ( 1 ), p. 011006 . 10.1115/1.3013442 14 02 2009 05 09 2009 17 11 2009 17 11 2009 mechanical contact rotors seals...

... finite element analysis mechanical contact plates (structures) tensile strength The stress zone in the joint had a conical shape with an angle α equal to 30 deg, as shown in Figs. 2 3 . It is obvious that the Juvinall method did not include the effect of the joint size D o...

... elasticity gears machine bearings mathematical analysis mechanical contact rings (structures) torque vibrations wind turbines gear dynamics drivetrain horizontal wind turbine flexible multibody planetary gears Planetary gears that are typically very compact are frequently applied...

... . MatWeb , http://www.matweb.com . 04 12 2008 23 04 2009 18 08 2009 aerospace components aircraft bending finite element analysis mechanical contact structural engineering Compliant mechanisms are often preferred over rigid link mechanisms, since compliant...

... 2007 07 04 2009 09 07 2009 gears mechanical contact mechanical engineering computing mathematical model kinematical error curvilinear gear circular-arc tooth profile contact ratio contact pattern It is known that gears are widely used in industry for power...

... costs by reducing time in the design stage. A current work extends this whole approach by adding new modules; for instance, a leakage module including the leakage approach. 03 11 2008 19 03 2009 05 06 2009 CAD gears hydraulic systems mechanical contact pumps software...