The significant advance in the boosted fabrication speed and printing resolution of additive manufacturing (AM) technology has considerably increased the capability of achieving product designs with high geometric complexity and provided tremendous potential for mass customization. However, it is also because of geometric complexity and large quantity of mass-customized products that the prefabrication (layer slicing, path planning, and support generation) is becoming the bottleneck of the AM process due to the ever-increasing computational cost. In this paper, the authors devise an integrated computational framework by synthesizing the parametric level set-based topology optimization method with the stereolithography (SLA)-based AM process for intelligent design and manufacturing of multiscale structures. The topology of the design is optimized with a distance-regularized parametric level set method considering the prefabrication computation. With the proposed framework, the structural topology optimization not only can create single material structure designs but also can generate multiscale, multimaterial structures, offering the flexibility and robustness of the structural design that the conventional methods could not provide. The output of the framework is a set of mask images that can be directly used in the AM process. The proposed approach seamlessly integrates the rational design and manufacturing to reduce the numerical complexity of the computationally expensive prefabrication process. More specifically, the prefabrication-friendly design and optimization procedure are devised to drastically eliminate the redundant computations in the traditional framework. Two test examples, including a free-form 3D cantilever beam and a multiscale meta-structure, are utilized to demonstrate the performance of the proposed approach. Both the simulation and experimental results verified that the new rational design could significantly reduce the prefabrication computation cost without affecting the original design intent or sacrificing the original functionality.
Parametric Topology Optimization Toward Rational Design and Efficient Prefabrication for Additive Manufacturing
Manuscript received March 26, 2018; final manuscript received January 3, 2019; published online February 28, 2019. Assoc. Editor: Qiang Huang.
- Views Icon Views
- Share Icon Share
- Search Site
Jiang, L., Ye, H., Zhou, C., and Chen, S. (February 28, 2019). "Parametric Topology Optimization Toward Rational Design and Efficient Prefabrication for Additive Manufacturing." ASME. J. Manuf. Sci. Eng. April 2019; 141(4): 041007. https://doi.org/10.1115/1.4042580
Download citation file: