Due to promising results in literature, particle composites in the range 0–100 percent SiC were evaluated. Focusing on high-temperature properties, mainly was used as sintering additive. Consolidation occurred primarily by hot-pressing, sintering tests were performed for comparison. Besides short-term properties like strength, toughness etc., long-term properties like creep and oxidation behavior were determined. Results as a function of SiC-content and microstructure were discussed with respect to materials’ performance at high temperatures and possibilities of their production on a technical scale. [S0742-4795(00)00201-5]
High-Temperature Properties of SiC-Si3N4 Particle Composites
Contributed by the International Gas Turbine Institute (IGTI) of THE AMERICAN SOCIETY OF MECHANICAL ENGINEERS for publication in the ASME JOURNAL OF ENGINEERING FOR GAS TURBINES AND POWER. Paper presented at the International Gas Turbine and Aeroengine Congress and Exhibition, Stockholm, Sweden, June 2–5, 1998; ASME Paper 98-GT-465. Manuscript received by IGTI March 25, 1998; final revision received by the ASME Headquarters October 20, 1999. Associate Technical Editor: R. Kielb.
Woetting , G., Caspers , B., Gugel, E., and Westerheide, R. (October 20, 1999). "High-Temperature Properties of SiC-Si3N4 Particle Composites ." ASME. J. Eng. Gas Turbines Power. January 2000; 122(1): 8–12. https://doi.org/10.1115/1.483171
Download citation file: