Skip Nav Destination
Issues
August 2005
This article was originally published in
Journal of Fuel Cell Science and Technology
ISSN 1550-624X
EISSN 1551-6989
In this Issue
Research Papers
Analysis of Water Transport in Proton Exchange Membranes Using a Phenomenological Model
J. Fuel Cell Sci. Technol. August 2005, 2(3): 149–155.
doi: https://doi.org/10.1115/1.1895945
Performance Measurements of Solid-Oxide Electrolysis Cells for Hydrogen Production
J. Fuel Cell Sci. Technol. August 2005, 2(3): 156–163.
doi: https://doi.org/10.1115/1.1895946
Topics:
Current density
,
Electrolysis
,
Hydrogen
,
Hydrogen production
,
Solid oxide fuel cells
,
Steam
,
Temperature
,
Fuel cells
,
Flow (Dynamics)
,
Gas flow
Mass/Charge Transfer in Mono-Block-Layer-Built-Type Solid-Oxide Fuel Cells
J. Fuel Cell Sci. Technol. August 2005, 2(3): 164–170.
doi: https://doi.org/10.1115/1.1895965
Topics:
Anodes
,
Electrodes
,
Flow (Dynamics)
,
Solid oxide fuel cells
,
Charge transfer
Fabrication Using High-Energy Ball-Milling Technique and Characterization of Pt-Co Electrocatalysts for Oxygen Reduction in Polymer Electrolyte Fuel Cells
J. Fuel Cell Sci. Technol. August 2005, 2(3): 171–178.
doi: https://doi.org/10.1115/1.1895985
Topics:
Ball milling
,
Catalysts
,
Manufacturing
,
Oxygen
,
Proton exchange membrane fuel cells
,
Carbon
,
Temperature
,
Alloys
,
Fuel cells
Experiences With the First Japanese-Made Solid-Oxide Fuel-Cell System
J. Fuel Cell Sci. Technol. August 2005, 2(3): 179–185.
doi: https://doi.org/10.1115/1.1895986
Topics:
Design
,
Electrolytes
,
Fuel cells
,
Fuels
,
Plates (structures)
,
Solid oxide fuel cells
,
Stainless steel
,
Oxidation
Plasma-Polymerized Proton-Conducting Membranes for Reducing Methanol Permeation in DMFCs
J. Fuel Cell Sci. Technol. August 2005, 2(3): 186–189.
doi: https://doi.org/10.1115/1.1928927
Topics:
Membranes
,
Methanol
,
Permeability
,
Plasmas (Ionized gases)
,
Polymerization
,
Protons
,
Water
,
Direct methanol fuel cells
Solid Oxide Fuel Cell Development by Using Novel Plasma Spray Techniques
J. Fuel Cell Sci. Technol. August 2005, 2(3): 190–196.
doi: https://doi.org/10.1115/1.1928928
Topics:
Anodes
,
Electrodes
,
Electrolytes
,
Plasmas (Ionized gases)
,
Solid oxide fuel cells
,
Sprays
,
Temperature
,
Plasma spraying
,
Manufacturing
,
Porosity
Novel Testing Method for Fuel Cell Hardware Design and Assembly
J. Fuel Cell Sci. Technol. August 2005, 2(3): 197–201.
doi: https://doi.org/10.1115/1.1928929
Topics:
Compression
,
Contact resistance
,
Design
,
Diffusion (Physics)
,
Fuel cells
,
Hardware
,
Manufacturing
,
Permeability
,
Testing
,
Flow (Dynamics)
Study of Efficiency Improvements in a Fuel-Cell-Powered Vehicle Using Water Electrolysis by Recovering Regeneration Energy and Avoiding Partial Load Operation
J. Fuel Cell Sci. Technol. August 2005, 2(3): 202–207.
doi: https://doi.org/10.1115/1.1928930
Topics:
Electrolysis
,
Fuel cells
,
Fuels
,
Hydrogen
,
Stress
,
Vehicles
,
Water
,
Oxygen
,
Electricity (Physics)
,
Cylinders
Design Innovation
Chemical Treatment Method for the Aluminum Bipolar Plates of PEM Fuel Cells
J. Fuel Cell Sci. Technol. August 2005, 2(3): 208–212.
doi: https://doi.org/10.1115/1.1928931
Email alerts
RSS Feeds
High-Accuracy Battery SOC Estimation Strategy Based on Deep Belief Network Cascaded with Extended Kalman Filter
J. Electrochem. En. Conv. Stor
DEVELOPMENT OF BORON CONTAINING ELECTROLYTE ADDITIVE FOR LITHIUM ION BATTERIES
J. Electrochem. En. Conv. Stor
Power batteries state of health estimation of pure electric vehicles for charging process
J. Electrochem. En. Conv. Stor
An Approach for Fast-Charging Lithium-Ion Batteries State of Health Prediction Based on Model-Data Fusion
J. Electrochem. En. Conv. Stor (May 2024)
