Offline multibody dynamics based modeling and simulation of vehicle dynamics has been pursued with varying levels of success for more than two decades. This has been used in design, controls, training, and other technical and programmatic objectives. Over the last decade, autonomous vehicle dynamics has become an important area of research. This has resulted in a growing need for onboard vehicle model that works with the vehicle controller and path planner. Typically, kinematic models have largely been used for these objectives. Use of dynamics models for onboard motion planning is a relatively new topic of research with only a handful of prior work. In this paper we report our attempts at addressing the need for onboard vehicle dynamics models for motion planning in relatively fast autonomous mobility scenarios. We present the idea of using adaptive motion models that trade fidelity and cost of simulation to enable a motion planner to select an adequate model. Towards this, we present representative simulation results that demonstrate the need for adaptivity. We then present some technical challenges with onboard vehicle models and our attempts at addressing these challenges. Finally, we present some results that compare raw vehicle data with model predictive results.
Skip Nav Destination
ASME 2014 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference
August 17–20, 2014
Buffalo, New York, USA
Conference Sponsors:
- Design Engineering Division
- Computers and Information in Engineering Division
ISBN:
978-0-7918-4639-1
PROCEEDINGS PAPER
Vehicle Dynamics Models for Onboard Motion Planning
Rudranarayan Mukherjee,
Rudranarayan Mukherjee
Jet Propulsion Laboratory, California Institute of Technology, Pasadena, CA
Search for other works by this author on:
Thomas Howard,
Thomas Howard
Jet Propulsion Laboratory, California Institute of Technology, Pasadena, CA
Search for other works by this author on:
Steven Myint,
Steven Myint
Jet Propulsion Laboratory, California Institute of Technology, Pasadena, CA
Search for other works by this author on:
Johnny Chang,
Johnny Chang
Jet Propulsion Laboratory, California Institute of Technology, Pasadena, CA
Search for other works by this author on:
Jack Craft
Jack Craft
Jet Propulsion Laboratory, California Institute of Technology, Pasadena, CA
Search for other works by this author on:
Rudranarayan Mukherjee
Jet Propulsion Laboratory, California Institute of Technology, Pasadena, CA
Thomas Howard
Jet Propulsion Laboratory, California Institute of Technology, Pasadena, CA
Steven Myint
Jet Propulsion Laboratory, California Institute of Technology, Pasadena, CA
Johnny Chang
Jet Propulsion Laboratory, California Institute of Technology, Pasadena, CA
Jack Craft
Jet Propulsion Laboratory, California Institute of Technology, Pasadena, CA
Paper No:
DETC2014-34831, V006T10A047; 8 pages
Published Online:
January 13, 2015
Citation
Mukherjee, R, Howard, T, Myint, S, Chang, J, & Craft, J. "Vehicle Dynamics Models for Onboard Motion Planning." Proceedings of the ASME 2014 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference. Volume 6: 10th International Conference on Multibody Systems, Nonlinear Dynamics, and Control. Buffalo, New York, USA. August 17–20, 2014. V006T10A047. ASME. https://doi.org/10.1115/DETC2014-34831
Download citation file:
18
Views
0
Citations
Related Proceedings Papers
Related Articles
Special Issue: Selected Papers From 2021 IDETC-CIE MSND Conference
J. Comput. Nonlinear Dynam (May,2022)
An Advanced Patient Lift and Transfer Device for the Home
J. Med. Devices (March,2010)
Reliability-Based Multivehicle Path Planning Under Uncertainty Using a Bio-Inspired Approach
J. Mech. Des (September,2022)
Related Chapters
A Novel Clustering Approach for Manets Based on Mobility
International Conference on Computer and Computer Intelligence (ICCCI 2011)
Research on Autobody Panels Developmental Technology Based on Reverse Engineering
International Conference on Advanced Computer Theory and Engineering, 5th (ICACTE 2012)
Dynamic Simulations to Become Expert in Order to Set Fuzzy Rules in Real Systems
International Conference on Advanced Computer Theory and Engineering, 4th (ICACTE 2011)