0
Research Papers

Learning Approach to Cycle-Time-Minimization of Wood Milling Using Adaptive Force Control

[+] Author and Article Information
Olof Sörnmo

Department of Automatic Control,
LTH,
Lund University,
Lund SE-221 00, Sweden
e-mail: olof.sornmo@control.lth.se

Björn Olofsson, Rolf Johansson

Department of Automatic Control,
LTH,
Lund University,
Lund SE-221 00, Sweden

Anders Robertsson

Department of Automatic Control,
LTH,
Lund University,
Lund SE-221 00, Sweden

Contributed by the Manufacturing Engineering Division of ASME for publication in the JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING. Manuscript received October 28, 2014; final manuscript received May 26, 2015; published online September 9, 2015. Assoc. Editor: Dragan Djurdjanovic.

J. Manuf. Sci. Eng 138(1), 011013 (Sep 09, 2015) (11 pages) Paper No: MANU-14-1557; doi: 10.1115/1.4030751 History: Received October 28, 2014

A majority of the machining processes in the industry of today are performed using position-controlled machine tools, where conservative feed rates have to be used in order to avoid excessive process forces. Instead of controlling the process forces, the feed rate, and consequently the material removal rate, can be maximized. In turn, this leads to decreased cycle times and cost savings. Furthermore, path planning with respect to time-minimization for milling processes, especially in nonisotropic materials, is not straightforward. This paper presents a model-based adaptive force controller that achieves optimal feed rates, in combination with a learning algorithm to obtain the optimal machining path, in terms of minimizing the milling duration. The proposed solution is evaluated in both simulation and experiments, where an industrial robot is used to perform rough-cut wood milling. Cycle-time reductions of 14% using force control compared to position control were achieved and on average an additional 28% cycle-time reduction with the proposed learning algorithm.

FIGURES IN THIS ARTICLE
<>
Copyright © 2016 by ASME
Your Session has timed out. Please sign back in to continue.

References

Sörnmo, O. , Olofsson, B. , Robertsson, A. , and Johansson, R. , 2012, “Increasing Time-Efficiency and Accuracy of Robotic Machining Processes Using Model-Based Adaptive Force Control,” 10th International IFAC Symposium on Robot Control (SYROCO), Dubrovnik, Croatia, pp. 543–548.
Hogan, N. , and Buerger, S. P. , 2005, Impedance and Interaction Control, Robotics and Automation Handbook, CRC Press, Boca Raton, FL.
He, J. , Pan, Z. , and Zhang, H. , 2007, “Adaptive Force Control for Robotic Machining Process,” American Control Conference (ACC), New York, July 9–13, pp. 1–6.
Liu, Y. , Cheng, T. , and Zuo, L. , 2001, “Adaptive Control Constraint of Machining Process,” Int. J. Adv. Manuf. Technol., 17(10), pp. 720–726. [CrossRef]
Daneshmend, L. , and Pak, H. , 1986, “Model Reference Adaptive Control of Feed Force in Turning,” ASME J. Dyn. Syst. Meas. Control, 108(3), pp. 215–222. [CrossRef]
Lauderbaugh, L. , and Ulsoy, A. , 1989, “Model Reference Adaptive Force Control in Milling,” ASME J. Manuf. Sci. Eng., 111(1), pp. 13–21.
Rober, S. , and Shin, Y. , 1996, “Control of Cutting Force for End Milling Processes Using an Extended Model Reference Adaptive Control Scheme,” ASME J. Manuf. Sci. Eng., 118(3), pp. 339–347. [CrossRef]
Wang, J. , Zhang, G. , Zhang, H. , and Fuhlbrigge, T. , 2008, “Force Control Technologies for New Robotic Applications,” IEEE International Conference on Technologies for Practical Robot Applications (TePRA), Woburn, MA, Nov. 10–11, pp. 143–149.
Lauderbaugh, L. , and Ulsoy, A. , 1988, “Dynamic Modeling for Control of the Milling Process,” ASME J. Manuf. Sci. Eng., 110(4), pp. 367–375.
Burke, L. I. , and Rangwala, S. , 1991, “Tool Condition Monitoring in Metal Cutting: A Neural Network Approach,” J. Intell. Manuf., 2(5), pp. 269–280. [CrossRef]
Cho, S. , Asfour, S. , Onar, A. , and Kaundinya, N. , 2005, “Tool Breakage Detection Using Support Vector Machine Learning in a Milling Process,” Int. J. Mach. Tools Manuf., 45(3), pp. 241–249. [CrossRef]
Ho, W.-H. , Tsai, J.-T. , Lin, B.-T. , and Chou, J.-H. , 2009, “Adaptive Network-Based Fuzzy Inference System for Prediction of Surface Roughness in End Milling Process Using Hybrid Taguchi-Genetic Learning Algorithm,” Expert Syst. Appl., 36(2), pp. 3216–3222. [CrossRef]
Rangwala, S. S. , and Dornfeld, D. A. , 1989, “Learning and Optimization of Machining Operations Using Computing Abilities of Neural Networks,” IEEE Trans. Syst. Man Cybern., 19(2), pp. 299–314. [CrossRef]
Wang, H. , Chang, H. , Wysk, R. , and Chandawarkar, A. , 1987, “On the Efficiency of NC Tool Path Planning for Face Milling Operations,” ASME J. Manuf. Sci. Eng., 109(4), pp. 370–376.
Yang, S.-H. , and Lee, S.-G. , 2002, “CNC Tool-Path Planning for High-Speed High-Resolution Machining Using a New Tool-Path Calculation Algorithm,” Int. J. Adv. Manuf. Technol., 20(5), pp. 326–333. [CrossRef]
Park, S. C. , and Choi, B. K. , 2000, “Tool-Path Planning for Direction-Parallel Area Milling,” Comput.-Aided Des., 32(1), pp. 17–25. [CrossRef]
Lin, R.-S. , and Koren, Y. , 1996, “Efficient Tool-Path Planning for Machining Free-Form Surfaces,” ASME J. Manuf. Sci. Eng., 118(1), pp. 20–28.
Lo, C.-C. , 1999, “Efficient Cutter-Path Planning for Five-Axis Surface Machining With a Flat-End Cutter,” Comput.-Aided Des., 31(9), pp. 557–566. [CrossRef]
Suh, S.-H. , and Shin, Y.-S. , 1996, “Neural Network Modeling for Tool Path Planning of the Rough Cut in Complex Pocket Milling,” J. Manuf. Syst., 15(5), pp. 295–304. [CrossRef]
Chen, Z. C. , and Abdelkhalek, S. , 2014, “A New Approach to Planning Plungers Paths for Efficient 2.5-Axis Computer Numerically Controlled Plunge Milling of Complex Pockets With Islands,” ASME J. Manuf. Sci. Eng., 136(4), pp. 1087–1357. [CrossRef]
Lim, E. M. , and Menq, C.-H. , 1997, “Integrated Planning for Precision Machining of Complex Surfaces. Part 1: Cutting-Path and Feedrate Optimization,” Int. J. Mach. Tools Manuf., 37(1), pp. 61–75. [CrossRef]
Feng, H.-Y. , and Menq, C.-H. , 1996, “A Flexible Ball-End Milling System Model for Cutting Force and Machining Error Prediction,” ASME J. Manuf. Sci. Eng., 118(4), pp. 461–469. [CrossRef]
van Overschee, P. , and De Moor, B. , 1994, “N4SID: Subspace Algorithms for the Identification of Combined Deterministic-Stochastic Systems,” Automatica, 30(1), pp. 75–93. [CrossRef]
Ljung, L. , 1987, System Identification: Theory for the User, Prentice Hall, Upper Saddle River, NJ.
Johansson, R. , 1993, System Modeling and Identification, Prentice Hall, Englewood Cliffs, NJ.
Ugural, A. C. , and Fenster, S. K. , 2003, Advanced Strength and Applied Elasticity, Prentice Hall, Upper Saddle River, NJ.
Zhou, K. , and Doyle, J. , 1998, Essentials of Robust Control, Prentice Hall, Upper Saddle River, NJ.
Åström, K. J. , and Wittenmark, B. , 1997, Computer-Controlled Systems, Prentice Hall, Englewood Cliffs, NJ.
Spitzer, F. , 1964, Principles of Random Walk, Springer-Verlag, New York.
Gouveia, L. , and Pires, J. M. , 1999, “The Asymmetric Travelling Salesman Problem and a Reformulation of the Miller–Tucker–Zemlin Constraints,” Eur. J. Oper. Res., 112(1), pp. 134–146. [CrossRef]
Frieze, A. M. , Galbiati, G. , and Maffioli, F. , 1982, “On the Worst-Case Performance of Some Algorithms for the Asymmetric Traveling Salesman Problem,” Networks, 12(1), pp. 23–39. [CrossRef]
Reinelt, G. , 1994, The Traveling Salesman: Computational Solutions for TSP Applications, Springer-Verlag, New York.
ABB Robotics, 2014, “ABB IRB140 Industrial Robot Data Sheet,” Data Sheet No. PR10031EN_R15.
Blomdell, A. , Dressler, I. , Nilsson, K. , and Robertsson, A. , 2010, “Flexible Application Development and High-Performance Motion Control Based on External Sensing and Reconfiguration of ABB Industrial Robot Controllers,” IEEE International Conference on Robotics and Automation (ICRA), Anchorage, AK, pp. 62–66.
Solectro, 2014, “Solectro UFM 1050 Data Sheet,” Data Sheet No. isel_data_UFM500_e-170812.
Zhang, H. , Wang, J. , Zhang, G. , Gan, Z. , Pan, Z. , Cui, H. , and Zhu, Z. , 2005, “Machining With Flexible Manipulator: Toward Improving Robotic Machining Performance,” IEEE/ASME International Conference on Advanced Intelligent Mechatronics (AIM), Monterey, CA, July 24–28, pp. 1127–1132.

Figures

Grahic Jump Location
Fig. 1

Block diagram of the proposed modeling approach, where h(fx,fy) = sign(fx)fx2+fy2

Grahic Jump Location
Fig. 3

Example of three different milling types, with different coverages of the tool and cutting directions

Grahic Jump Location
Fig. 2

Block diagram of the proposed force-control structure

Grahic Jump Location
Fig. 5

Force-controller performance simulation. The top panel shows |fd|, fx, fy, and fN. The second panel shows the actual and estimated κ and the third panel shows the actual and estimated β. The bottom panel displays the feed rate vr.

Grahic Jump Location
Fig. 6

Force-controller performance during several milling experiment segments in oak

Grahic Jump Location
Fig. 4

Experimental setup for performing force-controlled milling with an ABB IRB140 robot

Grahic Jump Location
Fig. 7

Milling path for simulation 1, where the dashed lines represent the transitions between training and/or pockets. The training phase is shown to the right, followed by pocket 1 and 2 from right to left.

Grahic Jump Location
Fig. 8

Milling path for simulation 3, where the dashed lines represent the transitions between pockets. Pockets 1–3 are shown from right to left.

Grahic Jump Location
Fig. 9

Milling path for simulation 5, where the dashed black lines represent the transitions between pockets. Pockets 1–3 are shown from right to left.

Grahic Jump Location
Fig. 11

The resulting workpiece after performing several milling experiments

Grahic Jump Location
Fig. 10

Milling path for experiment 5, where the dashed lines represent the transitions between pockets. Pockets 1–3 are shown from right to left.

Tables

Errata

Discussions

Some tools below are only available to our subscribers or users with an online account.

Related Content

Customize your page view by dragging and repositioning the boxes below.

Related Journal Articles
Related eBook Content
Topic Collections

Sorry! You do not have access to this content. For assistance or to subscribe, please contact us:

  • TELEPHONE: 1-800-843-2763 (Toll-free in the USA)
  • EMAIL: asmedigitalcollection@asme.org
Sign In