0
TECHNICAL PAPERS

Feasibility of Plasma Spraying in Developing MMC Coatings: Modeling the Heating of Coated Powder Particles

[+] Author and Article Information
Marios D. Demetriou, Adrienne S. Lavine, Nasr M. Ghoniem

Mechanical & Aerospace Engineering Department, University of California, Los Angeles, Los Angeles, CA 90095-1597

J. Manuf. Sci. Eng 124(1), 58-64 (Jan 01, 2001) (7 pages) doi:10.1115/1.1403742 History: Received September 01, 1999; Revised January 01, 2001
Copyright © 2002 by ASME
Your Session has timed out. Please sign back in to continue.

References

Yan,  S. P., Mohamed,  F. A., Lavernia,  E. J., and Srivatsan,  T. S., 1995, “Influence of Spray Atomization and Deposition Processing on Microstructure and Mechanical Behaviour of an Aluminum Alloy Metal-Matrix Composite,” J. Mater. Sci., 30, pp. 4726–4736.
Ye,  Z., Cheng,  H. S., and Chang,  N. S., 1996, “Wear Characteristics of Nickel/Silicon Carbide Composite Coating in Lubricated Reciprocating Contacts,” Tribol. Trans., 39, No. 3, pp. 527–536.
Cavaleiro,  A., Vieira,  T. M., and Lemperiere,  G., 1990, “The Structure of Thin Films Deposited from a Sintered Tungsten Carbide with a High Cobalt Content,” Thin Solid Films , 185, pp. 199–217.
Fiszdon,  J. K., 1979, “Melting of Powder Grains in a Plasma Flame,” Int. J. Heat Mass Transf., 22, pp. 749–761.
Lee,  Y. C., Chyou,  Y. P., and Pfender,  E., 1985, “Particle Dynamics and Particle Heat and Mass Transfer in Thermal Plasmas, Part II, Particle Heat and Mass Transfer in Thermal Plasmas,” Plasma Chem. Plasma Process., 5, pp. 391–415.
Jog,  M. A., and Huang,  L., 1996, “Transient Heating and Melting of Particles in Plasma Spray Coating Process,” J. Heat Transfer, 118, pp. 471–477.
Wan, Y. P., Prasad, V., Wang, G.-X., and Sampath, S., 1998, “Modeling of Powder Particle Heating, Melting and Evaporation in Plasma Spraying Processes,” ASME HTD, Vol. 361-4, Proceedings of the ASME Heat Transfer Division, Vol. 4, pp. 67–77.
Chen,  X., and Pfender,  E., 1982, “Unsteady Heating and Radiation Effects of Small Particles in a Thermal Plasma,” Plasma Chem. Plasma Process., 3, pp. 293–316.
Pfender,  E., and Lee,  Y. C., 1985, “Particle Dynamics and Particle Heat and Mass Transfer in Thermal Plasmas, Part I, The Motion of a Single Particle without Thermal Effects,” Plasma Chem. Plasma Process., 5, pp. 211–237.
Young,  R. M., and Pfender,  E., 1987, “Nusselt Number Correlations for Heat Transfer to Small Spheres in Thermal Plasma Flows,” Plasma Chem. Plasma Process., 7, pp. 211–229.
Demetriou, M. D., Lavine, A. S., and Ghoniem, N. M., 1999, “Numerical Simulation of Plasma Heating of a Composite Powder Particle,” Proceedings of the 5th ASME/JSME Joint Thermal Engineering Conference, Paper No. AJTE99/6158.
Sujith,  R. I., Waldherr,  G. A., Jagoda,  J. I., and Zinn,  B. T., 1996, “On the Effect of Evaporation on Droplet Drag,” ASME J. Fluids Eng., 118, pp. 862–864.
Chen,  X., and Pfender,  E., 1983, “Effect of the Knudsen Number on Heat Transfer to a Particle Immersed into a Thermal Plasma,” Plasma Chem. Plasma Process., 3, pp. 97–113.
Mills, A. F., 1995, Heat and Mass Transfer, Irwin, Chicago.
Sobolev,  V. V., Guilemany,  J. M., Miguel,  J. A., and Calero,  J. A., 1995, “Influence of In-Flight Dissolution Process on Composite Powder Particle (WC-Ni) Behaviour During High Velocity Oxy-Fuel Spraying,” Surf. Coat. Technol., 81, pp. 136–145.
Voller,  V., and Cross,  M., 1981, “Accurate Solutions of Moving Boundary Problems Using the Enthalpy Method,” Int. J. Heat Mass Transf., 24, pp. 545–555.
Huang,  P. C., Heberlein,  J., and Pfender,  E., 1995, “A Two-Fluid Model of Turbulence for a Thermal Plasma Jet,” Plasma Chem. Plasma Process., 15, pp. 25–46.
Chen,  X., Chyou,  Y. P., Lee,  Y. C., and Pfender,  E., 1985, “Heat Transfer to a Particle Under Plasma Conditions with Vapor Contamination from the Particle,” Plasma Chem. Plasma Process., 5, pp. 119–141.
Chen,  X., Heberlein,  J., and Pfender,  E., 1996, “Critical Analysis of Viscosity Data of Thermal Argon Plasmas at Atmospheric Pressures,” Plasma Chem. Plasma Process., 16, pp. 635–650.
Touloukian, Y. S., and Buyco, E. H., 1970, Thermophysical Properties of Matter, The TPRC Data Series, Vols. 1, 2, 4, 5 and 7, IFI Plenum, New York.
Shackelfold, J. F., and Alexander, W., 1992, The CRC Materials Science and Engineering Handbook, CRC Press, Florida.
Alfa Aesar, Research Chemicals, 1997–98, Metals and Materials (Company Catalogue).

Figures

Grahic Jump Location
Upper and lower limit of particle sizes to attain ideal state prior to impingement
Grahic Jump Location
Vaporization front vs. particle location in the reactor for a 10-μm radius particle with Ri=0.8Ro
Grahic Jump Location
Particle surface temperature vs. axial distance in the reactor—the effect of the interface radius on a 20-μm radius SiC-Al particle
Grahic Jump Location
Particle surface temperature vs. axial distance in the reactor for a 10-μm radius particle with Ri=0.8Ro
Grahic Jump Location
Particle surface temperature vs. axial distance in the reactor for a 30-μm radius particle with Ri=0.8Ro
Grahic Jump Location
Melting front vs. particle location in the reactor for a 30-μm radius particle with Ri=0.8Ro
Grahic Jump Location
Particle surface temperature vs. axial distance in the reactor—the effect of the interface radius on a 20-μm radius WC-Co particle
Grahic Jump Location
Particle surface temperature vs. axial distance in the reactor—the effect of the interface radius on a 20-μm radius SiC-Ni particle

Tables

Errata

Discussions

Some tools below are only available to our subscribers or users with an online account.

Related Content

Customize your page view by dragging and repositioning the boxes below.

Topic Collections

Sorry! You do not have access to this content. For assistance or to subscribe, please contact us:

  • TELEPHONE: 1-800-843-2763 (Toll-free in the USA)
  • EMAIL: asmedigitalcollection@asme.org
Sign In