0
TECHNICAL PAPERS

Modeling the Rolling of Ribbed Strip by a 3D Rigid Viscoplastic FEM

[+] Author and Article Information
Z. Y. Jiang, A. K. Tieu

School of Mechanical, Materials, and Mechatronic Engineering, University of Wollongong, Northfields Avenue, Wollongong, NSW 2522, Australia

J. Manuf. Sci. Eng 127(2), 386-393 (Apr 25, 2005) (8 pages) doi:10.1115/1.1794159 History: Received August 14, 2002; Revised March 26, 2004; Online April 25, 2005
Copyright © 2005 by ASME
Your Session has timed out. Please sign back in to continue.

References

Huang,  Y.-M., Lin,  H.-J., and Chen,  J. R., 2000, “A General Velocity Field for Shape Rolling of a V-Sectioned Sheet,” ASME J. Manuf. Sci. Eng., 122, pp. 227–234.
Jiang, Z. Y., 1995, “Forming Processes, Theory of the Strip With Longitudinal Ribs and Its Application,” Ph.D. thesis, Northeastern University, Shenyang.
Masude, S., Hirazawa, T., and Taniguchi, I., 1985, “Development of Hot-Rolled Strip With Longitudinal Ribs and Application to the Spiral Pipe,” Nippon Kokan Technical Report, 107 , pp. 31–37.
Van Rooyen,  G. T., and Backofen,  W. A., 1957, “Friction in Cold Rolling,” J. Iron Steel Inst., London, 186, pp. 235–244.
Lim,  L.-S., and Lenard,  J. G., 1984, “Study of Friction in Cold Strip Rolling,” ASME J. Eng. Mater. Technol., 106, pp. 139–146.
Chang,  D.-F., Marsault,  N., and Wilson,  M. R. D., 1996, “Lubrication of Strip Rolling in the Low-Speed Mixed Regime,” Tribol. Trans., 39, pp. 407–415.
Fleck,  N. A., Johnson,  K. L., Mear,  M. E., and Zhang,  L. C., 1992, “Cold Rolling of Foil,” Proc. Instn. Mech. Engrs.—J. Eng. Manuf.,206(B2), pp. 119–131.
Lenard,  J. G., 1992, “Friction and Forward Slip in Cold Strip Rolling,” Tribol. Trans., 35(3), pp. 423–428.
Liu,  Y. J., Tieu,  A. K., Wang,  D. D., and Yuen,  W. Y. D., 2001, “Friction Measurement in Cold Rolling,” J. Mater. Process. Technol., 111(1–3), pp. 142–145.
Sutcliffe,  M. P. F., and Rayner,  P. J., 1998, “Experimental Measurements of Load and Strip Profile in Thin Strip Rolling,” Int. J. Mech. Sci., 40(9), pp. 887–899.
Le,  H. R., and Sutcliffe,  M. P. F., 2001, “A Robust Model for Rolling of Thin Strip and Foil,” Int. J. Mech. Sci., 43(6), 1405–1419.
Hartley,  P., Sturgess,  C. E. N., Liu,  C., and Rowe,  G. W., 1989, “Experimental and Theoretical Studies of Workpiece Deformation, Stress, and Strain During Flat Rolling,” Int. Mater. Rev., 34(1), pp. 19–34.
Liu, C., Hartley, P., Sturgess, C. E. N., and Rowe, G. W., 1989, Analysis of Stress and Strain Distributions in Slab Rolling using an Elastic-Plastic Finite-Element Method, Balkema, Boston, pp. 231–236.
Liu,  C., Hartley,  P., Sturgess,  C. E. N., and Rowe,  G. W., 1987, “Finite-Element Modelling of Deformation and Spread in Slab Rolling,” Int. J. Mech. Sci., 29(4), pp. 271–283.
Xu,  Q., Hartley,  P., and Pillinger,  I., 2000, “Elastic-Plastic Finite Element Investigation of the Effect of the Aspect Ratio on Curvature in the Roll-Platen Forming Process,” J. Mater. Process. Technol., 104(1), pp. 25–33.
Wen,  S. W., Hartley,  P., Pillinger,  I., and Sturgess,  C. E. N., 1997, “Roll Pass Evaluation for Three-Dimensional Section Rolling Using a Simplified Finite Element Method,” Proc. Inst. Mech. Eng., Part B: J. Eng. Manuf.,211(B2), pp. 143–158.
Xu,  Q., Hartley,  P., and Pillinger,  I., 1996, “Finite Element Investigation of Curvature in the Roll Platen Forming Process,” J. Mater. Process. Technol., 60(1–4), pp. 103–108.
Hartley,  P., Wen,  S. W., Pillinger,  I., Sturgess,  C. E. N., and Petty,  D., 1993, “Finite Element Modelling of Section Rolling,” Ironmaking Steelmaking, 20(4), pp. 261–263.
Wen,  S. W., Hartley,  P., Pillinger,  I., and Sturgess,  C. E. N., 1992, “Finite Element Analysis of Four-Roll Pass Cold Rolling,” Proc. Inst. Mech. Eng., Part B: J. Eng. Manuf.,206(B2), pp. 133–141.
Osakda,  K., Nakano,  J., and Mori,  K., 1982, “Finite Element Method for Rigid-Plastic Analysis of Metal Forming—Formulation for Finite Deformation,” Int. J. Mech. Sci., 24(8), pp. 459–468.
Mori,  K., Osakada,  K., and Oda,  T., 1982, “Simulation of Plane-Strain Rolling by the Rigid-Plastic Finite Element Method,” Int. J. Mech. Sci., 24(9), pp. 519–527.
Mori,  K., Wang,  C. C., and Osakada,  K., 1996, “Inclusion of Elastic Deformation in Rigid-Plastic Finite Element Analysis,” Int. J. Mech. Sci., 38(6), pp. 621–631.
Mori,  K., and Osakada,  K., 1990, “Finite Element Simulation of Three-Dimensional Deformation in Shape Rolling,” Int. J. Numer. Methods Eng., 30(8), pp. 1431–1440.
Mori,  K., and Osakada,  K., 1987, “Analysis of the Forming Process of Sintered Powder Metals by A Rigid-Plastic Finite-Element Method,” Int. J. Mech. Sci., 29(4), pp. 229–238.
Mori, K., Hiramatsu, N., and Shibata, M., 2001, “Simplified Three-Dimensional FEM Simulation of Ring Rolling With Grooved Rolls,” Simulation of Materials Processing Theory, Methods and Applications Forming Processes (7th Int. Conf. on Numerical Methods in Industrial), K. Mori, ed., A. A. Balkema Publishers, Lisse, pp. 607–612.
Traore, K., Firestier, R., Mocellin, K., Montmitonnet, P., and Souchet, M., 2001, “Three Dimensional Finite Element Simulation of Ring Rolling,” Simulation of Materials Processing Theory, Methods and Applications (7th Int. Conf. on Numerical Methods in Industrial Forming Processes), K. Mori, ed., A. A. Balkema Publishers, Lisse, pp. 595–600.
Kobayashi, S., Oh, S.-I., and Altan, T., 1989, Metal Forming and the Finite-Element Method, Oxford University Press, New York.
Liu, X. H., 1994, Rigid-Plastic FEM and Its Application in Steel Rolling, Metallurgy Industry Press, Beijing.
Chenot,  J. L., Montmitonnet,  P., Buessler,  P., and Fau,  F., 1991, “Finite Element Computation of Spread in Hot Flat and Shape Rolling With a Steady State Approach,” Eng. Comput., 8(3), 245–255.
Liu, X. H., 1986, “Experimental and Numerical Analysis for H-Beam Rolling Process With Tensions on a Universal Mill,” Ph.D. thesis, Northeastern University, Shenyang.
Nikaido,  H., Naoi,  T., Shibata,  K., Kondo,  T., Osaka,  K., and Mori,  K., 1984, “Numerical Simulation of Width Spread of “Dog-Bone” Slab in Non-Steady Horizontal Rolling,” J. Jpn. Soc. Technol. Plast., 25(277), pp. 129–135.
Huisman,  H. J., and Huetink,  J., 1985, “Combined Eulerian-Langrangian Three-Dimensional Finite-Element Analysis of Edge-Rolling,” J. Mech. Work. Technol., 21, pp. 333–353.
Xiong,  S. W., Liu,  X. H., Wang,  G. D., and Zhang,  Q., 1997, “Simulation of Vertical-Horizontal Rolling Process During Width Reduction by Full Three-Dimensional Rigid-Plastic Finite Element Method,” J. Mater. Eng. Perform., 6(6), pp. 757–765.
Chung,  W. K., Choi,  S. K., and Thomson,  P. F., 1993, “Three-Dimensional Simulation of the Edge Rolling Process by the Explicit Finite Element Method,” J. Mater. Process. Technol., 38(1–2), pp. 85–102.
Jiang,  Z. Y., Xiong,  S. W., Liu,  X. H., Wang,  G. D., and Zhang,  Q., 1998, “3-D Rigid-Plastic FEM Analysis of the Rolling of a Strip With Local Residual Deformation,” J. Mater. Process. Technol., 79(1–3), pp. 109–112.
Jiang,  Z. Y., Liu,  X. L., Liu,  X. H., and Wang,  G. D., 2000, “Analysis of Ribbed-Strip Rolling by Rigid-Viscoplastic FEM,” Int. J. Mech. Sci., 42, pp. 693–703.
Zhang, X. M., Jiang, Z. Y., Liu, X. H., Wang, G. D., and Tieu, A. K., 2001, “3D Rigid Visco-Plastic FE Modelling of the Rolling Process of Ribbed Strip,” Simulation of Materials Processing Theory, Methods and Applications (7th Int. Conf. on Numerical Methods in Industrial Forming Processes), K. Mori, ed., A. A. Balkema Publishers, Lisse, pp. 567–571.
Jiang,  Z. Y., Tieu,  A. K., Lu,  C., and Sun,  W. H., 2002, “A Three-Dimensional Thermo-Mechanical Finite Element Modelling of Complex Strip Rolling Considering Sticking and Slipping Friction,” J. Mater. Process. Technol., 125/126, pp. 649–656.
Zhao, Z., and Wang, G. D., 1987, Modern Plastic Forming Mechanics, Northeastern University Press, Shenyang.
Xiang,  S. W., Wang,  G. D., Zhang,  Q., Zhang,  X. F., and Wu,  G. L., 1993, “A New Model for Deformation Resistance,” J. Iron Steel Inst., London, 28(5), pp. 21–26.
Ginzburg, V. B., 1989, Steel-Rolling Technology, Marcel Dekker, New York.
Kragelsky, I. V., Bobychin, M. N., and Kombalov, V. S., 1982, Friction and Wear Calculation Methods, Pergamon Press, Oxford.
Liu, H., 1999, 3-D Rolling Theory and its Application—Simulation of the Rolling Process by the Spline Finite Strip Method, Science Press, Beijing.

Figures

Grahic Jump Location
Schematic illustration of ribbed strip rolling
Grahic Jump Location
Cross section and plan view of strip with ribs
Grahic Jump Location
Distribution of the frictional shear stress model
Grahic Jump Location
FE meshes for simulating calculation of ribbed strip
Grahic Jump Location
Distribution of friction zones
Grahic Jump Location
Frictional shear stress in the roll bite
Grahic Jump Location
Comparison of numerical and experimental rolling force
Grahic Jump Location
Comparison of numerical and experimental roll torque
Grahic Jump Location
Relationship between reduction and rib height
Grahic Jump Location
Effect of the number of elements on rolling force
Grahic Jump Location
Effect of the number of elements on forward slip with variable friction model 1
Grahic Jump Location
Effect of the number of elements on rib height
Grahic Jump Location
Effect of mesh density on rib height
Grahic Jump Location
Effect of the number of elements on the number of iterations
Grahic Jump Location
Effect of friction factor on rib height
Grahic Jump Location
Effect of friction factor on rolling force

Tables

Errata

Discussions

Some tools below are only available to our subscribers or users with an online account.

Related Content

Customize your page view by dragging and repositioning the boxes below.

Related Journal Articles
Related eBook Content
Topic Collections

Sorry! You do not have access to this content. For assistance or to subscribe, please contact us:

  • TELEPHONE: 1-800-843-2763 (Toll-free in the USA)
  • EMAIL: asmedigitalcollection@asme.org
Sign In