0
TECHNICAL PAPERS

On a Novel Tool Life Relation for Precision Cutting Tools

[+] Author and Article Information
A. G. Mamalis

Manufacturing Technology Division, National Technical University of Athens, Athens, Greece

J. Kundrák

Department of Production Engineering, University of Miskolc, Miskolc, Hungary

M. Horváth

Department of Manufacture Engineering, Technical University of Budapest, Budapest, Hungary

J. Manuf. Sci. Eng 127(2), 328-332 (Apr 25, 2005) (5 pages) doi:10.1115/1.1794158 History: Received December 17, 2001; Revised March 25, 2004; Online April 25, 2005
Copyright © 2005 by ASME
Your Session has timed out. Please sign back in to continue.

References

Taylor,  F. W., 1901, “On the Art of Metal Cutting,” Trans. ASME, 28.
Horváth, M., “Computer Aided Planning of Part Machining Processes,” D.Sc. thesis (In Hungarian), MTA SZT AKI Tanulmányok, Budapest, 169/1985, 205 p.
Tóth, T., 1988, “Automated Technical Planning in Production Engineering,” D.Sc. thesis, Miskolc (in Hungarian).
“Theoretical Foundation of Technological Information System for Cutting by Superhard Tools With Definite Edges,” OTKA T4261, Project manager Kundrák, J., Miskolc, Hungary, 1992–94.
Bali, J., 1988, Cutting, Tankönyvkiadó, Budapest, Hungary, 538 p. (in Hungarian).
Kundrák, J., 1996, The Scientific Principles of Increasing the Effectiveness of Inner Surfaces’ Cutting with CBN Tools, Kharkov, 368 pp.
Kundrák, J., and Vajda, Gy., “Tool Life of CBN Tools in Hard Turning,” Proceedings of the Second International Conference on Machining and Measurements of Sculptured Surfaces, Krakow, Poland, pp. 129–136.

Figures

Grahic Jump Location
Typical tool life curves
Grahic Jump Location
Influence of cutting speed on tool life
Grahic Jump Location
Tool life curves with technological data change
Grahic Jump Location
Scanning electron micrograph showing the cutting tool wear for cutting conditions: vc=101 m/min,f=0.05 mm/rev,a=0.1 mm
Grahic Jump Location
Scanning electron micrographs and chemical composition microanalysis showing the cutting tool wear for cutting conditions: vc=101 m/min,f=0.05 mm/rev;a=0.2 mm    
Grahic Jump Location
Curves of tool life and length of cut of CBN tools (+) f=0.025 mm/rev; (○) f=0.075 mm/rev; (×) f=0.125 mm/rev(ap=0.1 mm; ∅45 mm; VB=0.4 mm)

Tables

Errata

Discussions

Some tools below are only available to our subscribers or users with an online account.

Related Content

Customize your page view by dragging and repositioning the boxes below.

Related Journal Articles
Related eBook Content
Topic Collections

Sorry! You do not have access to this content. For assistance or to subscribe, please contact us:

  • TELEPHONE: 1-800-843-2763 (Toll-free in the USA)
  • EMAIL: asmedigitalcollection@asme.org
Sign In