Design Method of Die Geometry and Pass Schedule by Void Index in Multi-Pass Drawing

[+] Author and Article Information
Takashi Kuboki

Dept. of Mechanical Engineering & Intelligent Systems, University of Electro-Communications, 1-5-1 Chofu Gaoka, Chofu City, Tokyo, 182-8585, Japan

Masaaki Abe

Products Development Section, Products Technology Department, Sumitomo Metals Kokura, Ltd., 1 Konomi-machi, Kokurakita-ku Kitakyushu, 802-8686, Japan

Yutaka Neishi

Corporate R&D Laboratories, Sumitomo Metal Industries, Ltd., 1-8 Fuso-cho, Amagasaki, 660-0891, Japan

Masayoshi Akiyama

Corporate R&D Laboratories Sumitomo Metal Industries, Ltd., 1-8 Fuso-cho, Amagasaki, 660-0891, Japan

J. Manuf. Sci. Eng 127(1), 173-181 (Mar 21, 2005) (9 pages) doi:10.1115/1.1830490 History: Received December 03, 2002; Revised March 20, 2004; Online March 21, 2005
Copyright © 2005 by ASME
Your Session has timed out. Please sign back in to continue.


Ooyane,  M., 1967, J. Jpn. Soc. of Mech. Eng., 75, No. 639, pp. 569–601, in Japanese.
Komori,  K., 1996, “Simulation of Chevron Cracks in Drawing,” J. Jpn. Soc. Technol. Plast., 37, No. 426, pp. 755–760, in Japanese.
Komori,  K., 2003, “Effect of Ductile Fracture Criteria on Chevron Crack Formation and Evolution in Drawing,” Int. J. Mech. Sci., 45, pp. 141–160.
Gurson,  A. L., 1997, “Continuum Theory of Ductile Rupture by Void Nucleation and Growth: Part 1 Yield Criteria and Flow Rules for Porous Ductile Media,” ASME J. Eng. Mater. Technol., 99, No. 1, pp. 2–15.
Reddy,  N. V., Dixit,  P. M., and Lal,  G. K., 2000, “Ductile Fracture Criteria and Its Prediction in Axisymmetric Drawing,” Int. J. Mach. Tools Manuf., 40, pp. 95–111.
Reddy,  N. V., Dixit,  P. M., and Lal,  G. K., 1996, “Central Bursting and Optimal Die Profile for Axisymmetric Extrusion,” J. Manuf. Sci. Eng., 118, pp. 579–584.
Alberti,  N., Barcellona,  A., Cannizzaro,  L., and Micari,  F., 1994, “Prediction of Ductile Fracture in Metal-Forming Processes,” CIRP Ann.,43, pp. 207–210.
Mathur,  K. K., and Dawson,  P. R., 1987, “On Modeling Damage Evolution During the Drawing of Metals,” Mech. Mater., 6, No. 3, pp. 179–196.
Needleman,  A., and Tvergaard,  V., 1984, “An Analysis of Ductile Rupture in Notched Bars,” J. Mech. Phys. Solids, 32, No. 6, pp. 461–490.
Nakagiri,  A., Matsukawa,  K., Watanabe,  S., and Sasagawa,  Y., 1997, “Influence of Die-Wire Contact Length Ratio on Chevron Crack and Optimum Drawing Condition in Wire Drawing,” J. Jpn. Soc. Technol. Plast.,39, No. 447, pp. 380–384, in Japanese.
Avitzur,  B., 1974, “New, Improved Criterion for the Prevention of Central Burst in Wire Drawing and Extrusion,” Wire J., Nov., pp. 77–86.
Chung,  J. S., and Hwang,  S. M., 1997, “Application of a Genetic Algorithm to Optimal Design of the Die Shape in Extrusion,” J. Mater. Process. Technol., 72, pp. 69–77.
Byon,  S. M., and Hwang,  S. M., 2003, “Die Shape Optimal Design in Cold and Hot Extrusion,” J. Mater. Process. Technol., 138, pp. 316–324.
Kuboki,  T., Furuta,  H., Yoshikawa,  H., Neishi,  Y., and Akiyama,  M., 2002, “Die Design by a Void Index in Multi-Pass Drawing,” IMechE Proceedings of Mechanical Engineering Science, Proceedings of the Institution of Mechaniccal Engineers, J. Mech. Eng. Sci., Part C.216, No. 12, pp. 1043–1049.
Wistreich,  J. G., 1955, Proc. Ind. Mech. Engrs. (London),169, p. 659.
Geleji, A., 1960, Bidlsame Formung der Metalle in Rechnung u. Versuch, Akademie-Verlag, Berlin, p. 454.
Avitzur,  B., 1968, “Analysis of Central Bursting Defects in Extrusion and Wire Drawing,” Trans. of ASME, J. Eng. Ind.,90, No. 1, pp. 79–91.
Hill,  R., 1948, J. Iron Steel Inst., London, 159, p. 353.
Tanaka,  H., and Yoshida,  K., 1983, “Operational Causes of Cupping Defects in Copper Wires-Study on Cupping Defects During Drawing Wires II-,” J. Jpn. Soc. Technol. Plast.,24, No. 270, pp. 737–743.
Kuboki,  T., Akiyama,  M., Neishi,  Y., and Kuroda,  K., 2000, “Effect of Final Drawing With Light Reduction on the Levelling of Residual Stress Distribution in Cold Bar Drawing,” Proceedings of IMechE Part C, J. Mech. Eng. Science,214, pp. 1389–1399.
Kuboki,  T., Akiyama,  M., Neishi,  Y., and Kuroda,  K., 2001, “A Study of the Effect of Die Geometry on the Residual Stress Levels Present After Bar Drawing,” Ironmaking Steelmaking, 28, No. 1, pp. 65–71.
Clift,  S. E., Hartley,  P., Sturgess,  C. E. N., and Rowe,  G. W., 1990, “Fracture Prediction in Plastic Deformation Processes,” Int. J. Mech. Sci., 32, No. 1, pp. 1–17.
Atkins,  A. G., 1996, “Fracture in Forming,” J. Mater. Process. Technol., 56, pp. 609–618.
Yoshida, Y., Iwahori, K., Yukawa, N., and Ishikawa, T., 2003, “Determination Method of Ductile Damage Parameters for FEM Simulation of Shearing Process Using Image Analysis (Part 3 Determination of Damage Model Formula),” Proc. the 54th Japan Joint Conference for the Technology of Plasticity, pp. 221–222, in Japanese.
Cockcroft,  M. G., and Latham,  D. J., 1968, “Ductility and the Workability of Metals,” J. Inst. Met., 96, p. 33.
Brozzo, P., Deluca, B., and Rendina, R., 1972, “A New Method for the Prediction of Formability Limits in Metal Sheets. Sheet Metal Forming and Formability,” Proceedings of the 7th Biennial Conference of the International Deep Drawing Research Group.


Grahic Jump Location
An example of mesh for analysis
Grahic Jump Location
Stress and strain distribution under standard conditions of die angle θ=14 deg and reduction in area Rd=17.4
Grahic Jump Location
Photograph of a central burst
Grahic Jump Location
The influence of die angle θ on the maximum stress σz−max
Grahic Jump Location
Relationship between ln((d0/d1)2) and equivalent strain εeq1
Grahic Jump Location
Influence of die angle θ on the void index J for multi-pass drawing
Grahic Jump Location
Histories of integration of hydrostatic stress σeqm and equivalent strain εeq
Grahic Jump Location
The geometry of a specimen for Archimedes’ method
Grahic Jump Location
The suppression effect of low-angle die on void growth
Grahic Jump Location
Images of voids observed by scanning electron microscopy (SEM)
Grahic Jump Location
Influence of reduction in area on void growth
Grahic Jump Location
Effect of coefficient of friction on the void index
Grahic Jump Location
Comparison between criteria




Some tools below are only available to our subscribers or users with an online account.

Related Content

Customize your page view by dragging and repositioning the boxes below.

Related Journal Articles
Related eBook Content
Topic Collections

Sorry! You do not have access to this content. For assistance or to subscribe, please contact us:

  • TELEPHONE: 1-800-843-2763 (Toll-free in the USA)
  • EMAIL: asmedigitalcollection@asme.org
Sign In