Study of 3D Micro-Ultrasonic Machining

[+] Author and Article Information
Z. Y. Yu, K. P. Rajurkar, A. Tandon

Department of Industrial & Management Systems Engineering, University of Nebraska-Lincoln 175 Nebraska Hall, Lincoln, NE 68588-0518

J. Manuf. Sci. Eng 126(4), 727-732 (Feb 04, 2005) (6 pages) doi:10.1115/1.1813482 History: Received February 11, 2004; Revised September 02, 2004; Online February 04, 2005
Copyright © 2004 by ASME
Your Session has timed out. Please sign back in to continue.


Taniguchi,  N., 1983, “Current Status in, and Future Trends of Ultraprecision Machining and Ultrafine Material Processing,” CIRP Ann., 32(2), pp. 573–582.
Masuzawa,  T., 2000, “State of the Art of Micromachining,” CIRP Ann., 49(2), pp. 473–488.
Zheng,  W., and Chen,  S., 2000, “Micro-Manufacturing of a Nano-Liter-Scale, Continuous-Flow Polymerase Chain Reaction System,” Trans. NAMRI/SME,XXX, pp. 551–555.
Shin,  H., Case,  E. D., and Kwon,  P. Y., 2000, “Novel Powder Processing Techniques to Fabricate Efficient Meso-Scale Heat Exchanger,” Trans. NAMRI/SME,XXX, pp. 671–679.
Ruska, W. S., 1987, Microelectronic Processing, McGraw-Hill, New York.
Kovacs, G. T. A., 1998, Micromachined Transducers Sourcebook, McGraw-Hill, New York.
van Zant, P., 1997, Microchip Fabrication, Third Edition, McGraw-Hill, New York.
Berker,  E. W., Ehrfeld,  W., Hagmann,  P., Maner,  A., and Munchmeyer,  D., 1986, “Fabrication of Micro-Structures With High Aspect Ratios and Great Structural Heights by Synchrotron Radiation Lithography, Galvanoforming, and Plastic Molding (LIGA Process),” Microelectron. Eng., 4, pp. 35–56.
Brinksmeier, E., Preub, W., and Schmutz, J., 1997, “Manufacture of Microstructures by Diamond Machining,” Proc. of 9th IPES/UME 4 International Conference, pp. 503–507.
Sawada, K., Takeuchi, Y., and Sato, T., 1998, “Improvement of Ultraprecision Micromachining Accuracy by Means of a High Precision Chuck System,” Proc. of CIRP International Seminar on Improving Machine Tool Performance, San Sebastian, Spain, pp. 599–606.
Schuster,  R., Kirchner,  V., Allongue,  P., and Ertl,  G., 2000, “Electrochemical Micromachining,” Science, 289, pp. 98–101.
Yu,  Z. Y., Masuzawa,  T., and Fujino,  M., 1998, “Micro-EDM for Three Dimensional Cavities,—Development of Uniform Wear Method,” CIRP Ann., 47(1), pp. 169–172.
Rajurkar,  K. P., and Yu,  Z. Y., 2000, “3D Micro-EDM Using CAD/CAM,” CIRP Ann., 49(1), pp. 127–130.
Meijer,  J., Du,  K., Gillner,  A., Hoffmann,  D., Kovalenko,  V. S., Masuzawa,  T., Ostendorf,  A., Poprawe,  R., and Schulz,  W., 2002, “Laser Machining by Short and Ultrashort Pulses, State of the Art and New Opportunities in the Age of the Photons,” CIRP Ann., 51(2), pp. 531–550.
Rajurkar, K. P., and Wang, W. M., 1997, “Nontraditional Machining,” CRC Handbook of Mechanical Engineering, CRC Press, Boca Raton, FL, Chapter 13, pp. 13/29–13/34.
Snoeys,  R., Staelens,  F., and Dekeyser,  W., 1986, “Current Trends in Non-Conventional Material Removal Processes,” CIRP Ann., 35(2), pp. 467–479.
Egashira,  K., Masuzawa,  T., Fujino,  M., and Sun,  X. O., 1997, “Application of USM to Micromachining by On-the-Machine Tool Fabrication,” Int. J. Elec. Machining2, pp. 31–36.
Sun, X. Q., Masuzawa, T., and Fujino, M., 1996, “Micro Ultrasonic Machining and Self-Aligned Multilayer Machining/Assembly Technologies for 3D Micromachines,” Proc. of Ninth Annual International Workshop on Micro ElectroMachanical Systems (MEMS’96), pp. 312–317.
Egashira,  K., and Masuzawa,  T., 1999, “Microultrasonic Machining by the Application of Workpiece Vibration,” CIRP Ann., 48(1), pp. 131–134.
Gilmore, R., 1995, “Ultrasonic Machining and Polishing,” Proc. Int. Symposium for Electromachining, Lausanne, Switzerland, pp. 941–951.
Thoe, T. B., Aspinwall, D. K., and Wise, M. L. H., 1995, “Review: Towards Ultrasonic Contour Machining,” Proc. Int. Symposium for Electromachining, pp. 953–962.
Masuzawa,  T., Fijino,  M., and Kobayashi,  K., 1985, “Wire Electrodischarge Grinding for Micromachining,” CIRP Ann., 34(1), pp. 431–434.
Yu,  Z. Y., Masuzawa,  T., and Fujino,  M., 1998, “3D Micro-EDM With Simple Shaped Electrode, Part 1: Machining of Cavities With Sharp Corners and Electrode Wear Compensation,” Int. J. Elec. Machining3, pp. 7–12.
Yu,  Z. Y., and Rajurkar,  K. P., 2000, “Generation of Complex Micro Cavities by Micro EDM,” Trans. NAMRI/SME,XXX, pp. 233–238.


Grahic Jump Location
Tool after hole drilling (diam 50 μm)
Grahic Jump Location
MRR versus average static load
Grahic Jump Location
Tool wear length versus average static load
Grahic Jump Location
Tool wear ratio versus average static load
Grahic Jump Location
Gap versus average static load
Grahic Jump Location
Integration of uniform wear method with CAD/CAM
Grahic Jump Location
Tool paths for slot machining
Grahic Jump Location
Diagram of USM principle
Grahic Jump Location
Structure of experimental equipment
Grahic Jump Location
USM-generated microhole drilling (diam 66 μm)




Some tools below are only available to our subscribers or users with an online account.

Related Content

Customize your page view by dragging and repositioning the boxes below.

Related Journal Articles
Related eBook Content
Topic Collections

Sorry! You do not have access to this content. For assistance or to subscribe, please contact us:

  • TELEPHONE: 1-800-843-2763 (Toll-free in the USA)
  • EMAIL: asmedigitalcollection@asme.org
Sign In