0
TECHNICAL PAPERS

Simulation and Analysis of Rigid/Foil Electrolytic In-Process Dressing (ELID) Systems for Grinding

[+] Author and Article Information
Zhenqi Zhu, Xiaohua Wang, Siva Thangam

Stevens Institute of Technology, Hoboken, NJ 07030

J. Manuf. Sci. Eng 126(3), 565-570 (Sep 07, 2004) (6 pages) doi:10.1115/1.1765152 History: Received April 10, 2003; Revised February 04, 2004; Online September 07, 2004
Copyright © 2004 by ASME
Your Session has timed out. Please sign back in to continue.

References

Ohmori,  H., Takahashi,  I., and Bandyopadhyay,  B. P., 1996, “Ultra-Precision Grinding of Structural Ceramics by Electrolytic in-process Dressing (ELID) Grinding,” J. Mater. Process. Technol., 57, pp. 272–277.
Nebashi,  N., Wakabayashi,  K., and Yamada,  M., 1998, “In-Process Truing/Dressing of Grinding Wheels by WEDG and ELD,” International Journal of Electrical Machining, 3, pp. 59–64.
Blok,  H., and van Rossum,  J. J., 1953, “The Foil Bearing—A New Departure in Hydrodynamic Lubrication,” Lubr. Eng., 9, pp. 316–320.
Liu, X., and Zhu, Z., 1999, “Innovative Approach of Electrolytic In-Process Dressing for High-Speed Grinding.” 3rd International Machining & Grinding, Cincinnati, Ohio.
Zhu,  Z., Liu,  X., and Thangam,  S., 2003, “Development and Analysis of Foil Electrodes for High Speed Electrolytic In-process Wheel Dressing,” Machining Science and Technology, 118, pp. 145–169.
Hanjalic,  K., and Launder,  B. E., 1976, “Contribution Towards a Reynolds-stress Closure for Low-Reynolds-number Turbulance,” J. Fluid Mech., 74, pp. 593–610.
Bernard, B. S., and Wallance, J. M. 2002, Turbulent Flow: Analysis, Measurement and Prediction, John Wiley.
Anderson, J. D., 1995, Computational Fluid Dynamics—The Basics with Applications, McGraw-Hill.
Missimer,  J. R., and Thomas,  L. C., 1983, “Analysis of Transitional and Fully Turbulent Plane Couette Flow,” ASME J. Lubr. Technol., 105, pp. 364–368.
Baumeister,  H. K., 1963, “Nominal Clearance of the Foil Bearing.” IBM J. Res. Dev., 7, pp. 153–154.
Renshaw,  A. A., 1999, “An Approximate Analytic Solution of the One-Dimensional Foil Bearing Problem.” ASME J. Appl. Mech., 66, pp. 1028–1032.
Lacey,  C. A., and Talke,  F. E., 1990, “A Tightly Coupled Numerical Foil Bearing Solution.” IEEE Trans. Magn., 26, pp. 3039–3043.
Sakai,  K., Nagawa,  Y., Okuyama,  K., and Terayama,  T., 1996, “Thin Spacing Analysis of Head-Tape Interface,” ASME J. Tribol., 119, pp. 800–812.
Ono,  K., Kodama,  N., and Michimura,  S., 1991, “A New Numerical Analysis Method for Two-Dimensional Foil-Bearing Problems Based on Inverse Analysis Concept,” JSME Int. J., 1, pp. 82–88.
Moes,  H., 1991, “The Air Gap Between Tape and Drum in a Video Recorder,” J. Magn. Magn. Mater., 95, pp. 1–13.
Wickert,  J. A., 1993, “Free Linear Vibration of Self-Pressurized Foil Bearings,” ASME J. Vibr. Acoust., 115, pp. 145–151.
Lakshmikumaran,  A. V., and Wickert,  J. A., 1996, “On the Vibration of Coupled Traveling String and Air Bearing Systems,” ASME J. Vibr. Acoust., 118, pp. 398–404.
Timoshenko and Krieger, 1959, Theory of Plates and Shells, McGraw-Hill.
Langlois,  W. E., 1963, “The Lightly Loaded Foil Bearing at Zero Angle of Wrap,” IBM J., 7, pp. 112–116.
Eshel,  A., 1974, “Transient Analysis of a Planar Hybrid Foil-Bearing Model,” ASME J. Lubr. Technol., July , pp. 432–436.
Eshel,  A., 1974, “Reduction of Air Films in Magnetic Recording by External Air Pressure,” ASME J. Lubr. Technol., April , pp. 247–249.

Figures

Grahic Jump Location
Schematic view of fluid flow in a traditional electrolytic in-process dressing system with a solid block as electrode
Grahic Jump Location
Mean velocity profiles for the dressing channel in ELID system with a solid electrode (Um=24 m/s). The nondimensional dressing gap has a range of 0 to 1 based on the range of r from R to R+h.
Grahic Jump Location
Mean velocity profiles for the dressing channel in ELID system with a solid electrode (Um=58 m/s)
Grahic Jump Location
Mean velocity profiles for the dressing channel in ELID system with a solid electrode (Um=118 m/s)
Grahic Jump Location
Schematic of electrolyte flow in ELID system with a flexible foil electrode

Tables

Errata

Discussions

Some tools below are only available to our subscribers or users with an online account.

Related Content

Customize your page view by dragging and repositioning the boxes below.

Related Journal Articles
Related eBook Content
Topic Collections

Sorry! You do not have access to this content. For assistance or to subscribe, please contact us:

  • TELEPHONE: 1-800-843-2763 (Toll-free in the USA)
  • EMAIL: asmedigitalcollection@asme.org
Sign In