The Influence of Fluid Management Policy and Operational Changes on Metalworking Fluid Functionality

[+] Author and Article Information
M. H. Greeley, R. E. DeVor, S. G. Kapoor

Department of Mechanical and Industrial Engineering, University of Illinois at Urbana-Champaign, Urbana, IL 61801

N. Rajagopalan

Illinois Waste Management and Research Center, University of Illinois at Urbana-Champaign, Champaign, IL 61820

J. Manuf. Sci. Eng 126(3), 445-450 (Sep 07, 2004) (6 pages) doi:10.1115/1.1765145 History: Received December 01, 2002; Revised January 01, 2004; Online September 07, 2004
Copyright © 2004 by ASME
Your Session has timed out. Please sign back in to continue.


Kalidas,  S., Kapoor,  S., and DeVor,  R., 2002, “Influence of Thermal Effects on Hole Quality in Dry Drilling, Part 2: Thermo-Elastic Effects on Hole Quality,” ASME J. Manuf. Sci. Eng., 124, May, pp. 267–274.
Upton,  D., 1996, “An Assessment of Cutting Fluid Performance and Improvements in Surface Finish,” Transactions of the Institute of Metal Finishing, 74(3), pp. 103–105.
Nachtman, E., and Kalpakjian, S., 1985, Lubricants and Lubrication in Metalworking Operations, Marcel Dekker, Inc., New York, NY.
Byers, J., ed., 1994, Metalworking Fluids, Marcel Dekker, Inc., New York, NY.
Greeley,  M. H., DeVor,  R. E., Kapoor,  S. G., and Rajagopalan,  N., 2003, “Evaluating Performance Changes due to Gradual Component Depletion in Metalworking Fluids,” Trans. NAMRI/SME, XXXI, pp. 337–344.
Sheng,  P. S., and Oberwalleney,  S., 1997, “Life-Cycle Planning of Cutting Fluids—A Review,” ASME J. Manuf. Sci. Eng., 119, pp. 791–800.
Sluhan,  W., 1993, “Don’t Recycle—Keep Your Coolant,” American Machinist, October, pp. 53–55.
Eppert, J., 2002, “Modeling The Effects of Selective Component Depletion Via Tramp Oil Extraction and Chip Adsorption in Industrial Metalworking Fluid Systems,” Master’s Thesis, University of Illinois at Urbana-Champaign, Urbana, IL.
Eppert,  J., Rajagopalan,  N., DeVor,  R., and Kapoor,  S., “Modeling the Effect of Tramp Oil Contamination on Selective Component Depletion in Metalworking Fluid Systems,” ASME J. Manuf. Sci. Eng., in press.
Almen,  R., Mantelli,  G., McTeer,  P., and Nakayama,  S., 1982, “Application of High-Performance Liquid Chromatography to the Study of the Effect of Microorganisms in Emulsifiable Oils,” Lubr. Eng., 38, pp. 99–103.
Barman,  B., 1993, “Influence of Temperature on the Degradation of Isothiazolone Biocides in Aqueous Media and in MWF Concentrate,” Lubr. Eng., 50, pp. 351–355.
Rios,  G., Pazos,  C., and Coca,  J., 1998, “Zeta Potentials of Cutting-Oil Waer Emulsions: Influences of Inorganic Salts,” Journal of Dispersion Science and Technology, 19(5), pp. 661–678.
Feisal,  E. V., and Bennett,  E. O., 1961, “The Effect of Water Hardness on the Growth of Pseudomonas Aeruginosa in Metal Cutting Fluids,” J. Appl. Bacteriol., 24(2), pp. 125–130.
Bennett,  E. O., 1974, “Water Quality and Coolant Life,” Lubr. Eng., 30(11), pp. 549–555.
Rios,  G., Pazos,  C., and Coca,  J., 1997, “Destabilization of Cutting Oil Emulsion Using Inorganic Salts as Coagulants,” Colloids Surf., 138, pp. 383–389.
Faibish,  R., and Cohen,  Y., 2001, “Fouling and Rejection Behavior of Ceramic and Polymer-Modified Ceramic Membranes for Ultrafiltration of Oil-in-Water Emulsions and Microemulsions,” Colloids Surf., 191, pp. 27–40.
Skerlos,  S., DeVor,  R., Kapoor,  S., Rajagopalan,  N., and Sanford,  R., 2001, “Model of Biomass Concentration in a Metalworking Fluid Reservoir Subject to Constant Biofilm Contamination During Membrane Filtration,” Transactions of NAMRI/SME, XXIX, pp. 229–234.
Skerlos,  S., Rajagopalan,  N., DeVor,  R., Kapoor,  S., and Don Angspatt,  V., 2000, “Ingredient-Wise Study of Flux Characteristics in the Ceramic Membrane Filtration of Uncontaminated Synthetic Metalworking Fluids, Part 2: Analysis of Underlying Mechanisms,” ASME J. Manuf. Sci. Eng., 122, November, pp. 746–752.
Brock, T., 1983, Membrane Filtration: A User’s Guide and Reference Manual, Science Tech, Inc., Madison, WI.
Yuan,  W., and Zydney,  A., 1999, “Effects of Colution Environment on Humic Acid Fouling During Microfiltration,” Desalination, 122, pp. 63–76.
Belfort,  G., Davis,  R., and Zydney,  A., 1994, “The Behavior of Suspensions and Macromolecular Solutions in Crossflow Microfiltration,” J. Membr. Sci., 96, pp. 1–58.
DeVor, R. E., Chang, T., and Sutherland, J. W., 1992, Statistical Quality Design and Control, Prentice Hall, Upper Saddle River, NJ.
Misra,  S., and Skold,  R., 1999, “Membrane Filtration Studies of Inversely Soluble Model MWFs,” Sep. Sci. Technol., 34(1), pp. 53–67.
Yang,  C., 1978, “The Effects of Water Hardness on the Lubricity of a Semisynthetic Cutting Fluid,” Lubr. Eng., 35, pp. 133–136.


Grahic Jump Location
Recorded responses for synthetic MWF evaluation
Grahic Jump Location
Cake formation in microfiltration
Grahic Jump Location
Adsorption in microfiltration
Grahic Jump Location
Two-way diagram of torque as microfiltration and hydraulic oil contamination vary
Grahic Jump Location
Oil coagulation as hardness increases
Grahic Jump Location
Recorded responses as dilutant hardness varies in synthetic MWF
Grahic Jump Location
Recorded responses as dilutant hardness varies in semi-synthetic MWF
Grahic Jump Location
Flux of Castrol Clearedge 6510 as dilutant hardness and EDTA additions vary
Grahic Jump Location
Microfiltration schematic



Some tools below are only available to our subscribers or users with an online account.

Related Content

Customize your page view by dragging and repositioning the boxes below.

Related Journal Articles
Related eBook Content
Topic Collections

Sorry! You do not have access to this content. For assistance or to subscribe, please contact us:

  • TELEPHONE: 1-800-843-2763 (Toll-free in the USA)
  • EMAIL: asmedigitalcollection@asme.org
Sign In