0
TECHNICAL PAPERS

Comparative Statistical Analysis of Test Parts Manufactured in Production Environments

[+] Author and Article Information
David E. Gilsinn

Mathematical and Computational Sciences Division, National Institute of Standards and Technology, Gaithersburg, MD 20899-8910e-mail: dgilsinn@nist.gov

Alice V. Ling

Air Force Research Laboratory, Kirtland AFB, NM 87117

J. Manuf. Sci. Eng 126(1), 189-199 (Mar 18, 2004) (11 pages) doi:10.1115/1.1645876 History: Received October 01, 2003; Online March 18, 2004
Copyright © 2004 by ASME
Your Session has timed out. Please sign back in to continue.

References

International Organization for Standardization, Guide to the Expression of Uncertainty in Measurement.
Taylor, B. N., and Kuyatt, C. E., 1994, “Guidelines for Evaluating and Expressing the Uncertainty of NIST Measurement Results,” NIST Technical Note 1297, National Institute of Standards and Technology, Gaithersburg, MD, 20899.
American National Standards Institute, 1997, “American National Standard for Expressing Uncertainty—U.S. Guide to the Expression of Uncertainty in Measurement,” ANSI/NCSL Z540-2-1997.
Gilsinn, D. E., and Ling, A. V., 2002, “Comparative Statistical Analysis of Test Parts Manufactured in Production Environments,” NISTIR 6868, National Institute of Standards and Technology, Gaithersburg, MD, 20899-8910.
Wilhelm,  R. G., Srinivasan,  N., and Farabaugh,  F., 1997, “Part Form Errors Predicted From Machine Tool Performance Measurements,” CIRP Ann., 46, pp. 471–474.
Chatterjee,  S., 1997, “An Assessment of Quasi-Static and Operational Errors in NC Machine Tools,” J. Manuf. Syst., 16(1), pp. 59–68.
Shin,  Y. C., and Wei,  Y., 1992, “A Statistical Analysis of Positional Errors of a Multiaxis Machine Tool,” Precis. Eng., 14, pp. 139–146.
Kaminski,  J., and Crafoord,  R., 1991, “Position Accuracy of Drilled Holes,” CIRP Ann., 40, pp. 503–506.
Lehtihet,  E. A., and Gunasena,  U. N., 1990, “Statistical Models for the Relationship Between Production Errors and the Position Tolerance of a Hole,” CIRP Ann., 39, pp. 569–572.
Lee,  S. J., Eman,  K. F., and Wu,  S. M., 1987, “An Analysis of the Drill Wandering Motion,” ASME J. Eng. Ind., 109, pp. 297–305.
Fujii,  H., Marui,  E., and Ema,  S., 1986, “Whirling Vibration in Drilling, Part 1: Cause of Vibration and Role of Chisel Edge,” ASME J. Eng. Ind., 108, pp. 157–162.
Fujii,  H., Marui,  E., and Ema,  S., 1986, “Whirling Vibration in Drilling, Part 2: Influence of Drill Geometries, Particularly of the Drill Flank, on the Initiation of Vibration,” ASME J. Eng. Ind., 108, pp. 163–168.
Fujii,  H., Marui,  E., and Ema,  S., 1988, “Whirling Vibration in Drilling, Part 3: Vibration Analysis in Drilling Workpiece With a Pilot Hole,” ASME J. Eng. Ind., 110, pp. 315–321.
Magrab,  E. B., and Gilsinn,  D. E., 1984, “Buckling Loads and Natural Frequencies of Drill Bits and Fluted Cutters,” ASME J. Eng. Ind., 106, pp. 196–204.
Shen,  Y., and Duffie,  N. A., 1995, “An Uncertainty Analysis Method for Coordinate Referencing in Manufacturing Systems,” ASME J. Eng. Ind., 117, pp. 42–48.
Shen,  Y., and Duffie,  N. A., 1991, “Uncertainties in the Acquisition and Utilization of Coordinate Frames in Manufacturing Systems,” CIRP Ann., 40(1), pp. 527–530.
Bauer,  W. F., 1958, “The Monte Carlo Method,” J. Soc. Ind. Appl. Math., 6(4), pp. 438–451.
Yau,  H., 1997, “Evaluation and Uncertainty Analysis of Vectorial Tolerances,” Precis. Eng., 20, pp. 123–137.
Phillips,  S. D., Borchardt,  B., Estler,  W. T., and Buttress,  J., 1998, “The Estimation of Measurement Uncertainty of Small Circular Features Measured by Coordinate Measuring Machines,” Precis. Eng., 22, pp. 87–97.
ASME B5.54-1992, 1993, Methods for Performance Evaluation of Computer Numerically Controlled Machining Centers, The American Society of Mechanical Engineers, New York.
Ziegert,  J. C., and Mize,  C. D., 1994, “The Laser Ball Bar: A New Instrument for Machine Tool Metrology,” Precis. Eng., 16, pp. 259–267.
Srinivasa,  N., and Ziegert,  J. C., 1996, “Automated Measurement and Compensation of Thermally Induced Error Maps in Machine Tools,” Precis. Eng., 19, pp. 112–132.
Schmitz,  T., and Ziegert,  J., 1998, “Premachining Computer Numerical Control Contour Validation,” Precis. Eng., 22, pp. 10–18.
Donmez, M. A., 1985, “A General Methodology for Machine Tool Accuracy Enhancement: Theory, Application and Implementation,” Ph.D. Thesis, Purdue University.
Coleman, H. W., and Steele, W. G., 1999, Experimentation and Uncertainty Analysis for Engineers, John Wiley & Sons, Inc., New York.
Wheeler, A. J., and Ganji, A. R., 1996, Introduction to Engineering Experimentation, Prentice Hall, Englewood Cliffs.
Montgomery, D. C., and Peck, E. A., 1992, Introduction to Linear Regression Analysis, John Wiley & Sons, Inc., New York.
Mandel,  J., 1984, “Fitting Straight Lines When Both Variables are Subject to Error,” J. Quality Technol., 16, pp. 1–14.
Dixon, W. J., and Massey, Jr., F. J., 1957, Introduction to Statistical Analysis, McGraw-Hill Book Company, Inc., New York.
Mood, A. M., and Graybill, F. A., 1963, Introduction to the Theory of Statistics, McGraw-Hill Book Company, Inc., New York.

Figures

Grahic Jump Location
Test part specifications. Dimensions are in millimeters.
Grahic Jump Location
Laser Ball Bar (LBB) configuration
Grahic Jump Location
LBB measurements of machine tool error components showing the mean least squares trend line with uncertainty band using a coverage factor of two
Grahic Jump Location
Numbered peripheral holes of Fig. 1
Grahic Jump Location
Mean X (a) errors for the centers of the drilled holes and mean X (b) errors for centers of milled holes. Vertical axis represents errors in mm. Horizontal axis represents part numbers.
Grahic Jump Location
Arrows represent the direction and scaled locations of the predicted (a), the milled (b), and the drilled (c) hole center locations

Tables

Errata

Discussions

Some tools below are only available to our subscribers or users with an online account.

Related Content

Customize your page view by dragging and repositioning the boxes below.

Related Journal Articles
Related eBook Content
Topic Collections

Sorry! You do not have access to this content. For assistance or to subscribe, please contact us:

  • TELEPHONE: 1-800-843-2763 (Toll-free in the USA)
  • EMAIL: asmedigitalcollection@asme.org
Sign In