Probe Radius Compensation of Workpiece Localization

[+] Author and Article Information
Zhenhua Xiong

School of Mechanical Engineering, Shanghai Jiaotong University, 1954 Hua Shan Road, Shanghai, 200030, P.R. China e-mail: mexiong@sjtu.edu.cn

Zexiang Li

Dept. of EEE, Hong Kong University of Science & Technology, Clear Water Bay, Kowloon, Hong Kong

J. Manuf. Sci. Eng 125(1), 100-104 (Mar 04, 2003) (5 pages) doi:10.1115/1.1537260 History: Received October 01, 2001; Revised April 01, 2002; Online March 04, 2003
Copyright © 2003 by ASME
Topics: Probes , Errors , Machinery
Your Session has timed out. Please sign back in to continue.


Grimson,  W. E., and Lozano-Perez,  T., 1984, “Model-Based Recognition and Localization from Sparse Range or Tactile Data,” Int. J. Robot. Res., 3(3), pp. 3–35.
Hong, J., and Tan, X., 1990, “Method and Apparatus for Determining Position and Orientation of Mechanical Objects,” U.S. Patent No. 5208763.
Menq,  C. H., Yau,  H., and Lai,  G., 1992, “Automated Precision Measurement of Surface Profile in CAD-Directed Inspection,” IEEE Trans. Rob. Autom., 8(2), pp. 268–278.
Li, X. M., Yeung, M., and Li, Z. X., 1996, “An Algebraic Algorithm for Workpiece Localization,” IEEE Intl. Conf. on Robotics and Automation, pp. 152–158.
Yau,  H. T., and Menq,  C. H., 1996, “A Unified Least-Squares Approach to the Evaluation of Geometric Errors Using Discrete Measurement Data,” Int. J. Mach. Tools Manuf., 36(11), pp. 1269–1290.
Li,  Z. X., Gou,  J. B., and Chu,  Y. X., 1998, “Geometric Algorithms for Workpiece Localization,” IEEE Trans. Rob. Autom., 14(6), pp. 864–78, Dec.
Gou,  J. B., Chu,  Y. X., and Li,  Z. X., 1998, “On the Symmetric Localization Problem,” IEEE Trans. Rob. Autom., 14(4), pp. 533–540.
Chu,  Y. X., Gou,  J. B., and Li,  Z. X., 1999, “On the Hybrid/Envelopment Problem,” Int. J. Robot. Res., 18(5), pp. 491–501.
Horn,  B. K., 1987, “Closed-Form Solution of Absolute Orientation Using Unit Quaternions,” J. Opt. Soc. Am. A, 4(4), pp. 629–642.
Nadas, A., 1978, “Least Squares and Maximum Likelihood Estimates of Rigid Motion,” Technical report, IBM Research Report, RC6945.
Arun,  K. S., Huang,  T. S., and Blostein,  S. D., 1987, “Least-Squares Fitting of Two 3-D Point Sets,” IEEE Trans. Pattern Anal. Mach. Intell., 9(5), pp. 698–700.
Walker,  M. W., Shao,  L., and Volz,  R. A., 1991, “Estimating 3-D Location Parameters Using Dual Number Quaternions,” CVGIP: Image Understand., 54(3), pp. 358–67.
Lorusso, A., Eggert, D. W., and Fisher, R. B., 1995, “A Comparison of Four Algorithms for Estimating 3-D Rigid Transformations,” Proceedings of the 6th British Machine Vision Conference, pp. 237–46.
Chu, Y. X., Gou, J. B., and Li, Z. X., 1997, “Performance Analysis of Localization Algorithms,” IEEE Intl. Conf. on Robotics and Automation, Vol. 2, pp. 1247–52.
Chu, Y. X., Gou, J. B., and Li, Z. X., 1998, “Localization Algorithms: Performance Evaluation and Reliability Analysis,” Int. Conf. on Robotics and Automation, Vol. 4, pp. 3652–7.
Chiang,  Y. M., and Chen,  F. L., 1999, “Sculptured Surface Reconstruction from CMM Measurement Data by a Software Iterative Approach,” Int. J. Prod. Res., 37(8), pp. 1679–95.
Ainsworth,  I., Ristic,  M., and Brujic,  D., 2000, “CAD-Based Measurement Path Planning for Free-Form Shapes Using Contact Probes,” Int. J. Adv. Manuf. Technol., 16, pp. 23–31.
Yang,  Q., Butler,  C., and Baird,  P., 1996, “Error Compensation of Touch Trigger Probes on CMM,” Measurement , 18(1), pp. 47–57.
Estler,  W. T., Phillips,  S. D., Borchardt,  B., Hopp,  T., Witzgall,  C., and Levensona,  M. S., 1996, “Error Compensation for CMM Touch Trigger Probes,” Precis. Eng., 19(2/3), pp. 85–97.
Shen,  Y. L., and Zhang,  X. P., 1999, “Pretravel Compensation for Horizontally Oriented Touch Trigger Probes with Straight Styli,” J. Manuf. Syst., 18(3), pp. 175–86.
Kang, B., Gou, J. B., Chu, Y. X., and Li, Z. X., 1997, “A CAD-Based Probing and Localisation Method for Arbitrarily Fixed Workpiece,” Int. Conf. on Robotics and Automation, Vol. 2, pp. 1259–64.
Ip,  W. L., and Loftus,  M., 1996, “Adaptive and Compensation Method in Free-Form Surface Assessment,” Proc. Inst. Mech. Eng. Part B: J. Eng. Manufacture, 210, pp. 135–145.
Menq,  C., and Chen,  F. L., 1996, “Curve and Surface Approximation from CMM Measurement Data,” Computers In. Engng, 30(2), pp. 211–25.
Suh,  S. H., Lee,  S. K., and Lee,  J. J., 1996, “Compensating Probe Radius in Free Surface Modeling with CMM: Simulation and Experiment,” Int. J. Prod. Res., 34(2), pp. 507–23.
Mayer,  J. R. R., Mir,  Y. A., Vafaeesefat,  A., and Balazinski,  M., 1997, “Touch Probe Radius Compensation for Coordinate Measurement Using Kriging Interpolation,” Proc. Inst. Mech. Eng., 211, (Part B) pp. 11–18.
Chu, Y. X., 1999, “Workpiece Localization: Theory, Algorithms and Implementation,” PhD thesis, HKUST, March.
Aoyama,  H., Kawai,  M., and Kishinami,  T., 1989, “A New Method for Detecting the Contact Point Between a Touch Probe and a Surface,” CIRP Ann., 38(1), pp. 517–20.
Tiller, W., and Piegl, L., 1995, The NURBS Book, Springer-Verlag, 1st edition.
Murray, R., Li, Z. X., and Sastry, S., 1994, A Mathematical Introduction to Robotic Manipulation, CRC Press.
Xiong, Z. H., Chu, Y. X., Liu, G. F., and Li, Z. X., 2001, “Workpiece Localization and Computer Aided Setup System,” Int. Conf. on Intelligent Robots and Systems 2001, pp. 1141–46.


Grahic Jump Location
Probe error caused by stylus radius
Grahic Jump Location
Classification of surface probing directions
Grahic Jump Location
Point relations in probe radius compensation
Grahic Jump Location
Localization results with and without probe radius compensation
Grahic Jump Location
A model with a sculptured surface in our simulation
Grahic Jump Location
Experimental model and localization results



Some tools below are only available to our subscribers or users with an online account.

Related Content

Customize your page view by dragging and repositioning the boxes below.

Related Journal Articles
Related eBook Content
Topic Collections

Sorry! You do not have access to this content. For assistance or to subscribe, please contact us:

  • TELEPHONE: 1-800-843-2763 (Toll-free in the USA)
  • EMAIL: asmedigitalcollection@asme.org
Sign In