The Effect of Flexible-Tool Rotation on Regenerative Instability in Machining

[+] Author and Article Information
Chen-Jung Li, A. Galip Ulsoy, William J. Endres

Department of Mechanical Engineering, University of Michigan, Ann Arbor, MI 48109-2125

J. Manuf. Sci. Eng 125(1), 39-47 (Mar 04, 2003) (9 pages) doi:10.1115/1.1536657 History: Received February 01, 2000; Revised June 01, 2002; Online March 04, 2003
Copyright © 2003 by ASME
Your Session has timed out. Please sign back in to continue.


Sweeney, G., and Tobias, S. A., 1963, “An Algebraic Method for the Determination the Dynamic Stability of Machine Tools,” Proc., Int. Prod. Engg. Res. Conf., Pittsburgh, pp. 475–485.
Tlusty, J., and Polacek, M., 1963, “The Stability of the Machine Tool Against Self-Excited Vibration in Machining,” Proc., Int. Prod. Engg. Res. Conf., Pittsburgh, pp. 454–465.
Merritt,  H. E., 1965, “Theory of Self-Excited Machine-Tool Chatter,” ASME J. Eng. Ind., 87, pp. 447–454.
Parker,  E. W., 1970, “Dynamic Stability of a Cantilever Boring Bar with Machined Flats Under Regenerative Cutting Conditions,” J. Mech. Eng. Sci., 12, pp. 104–115.
Zhang,  G. M., and Kapoor,  S. G., 1987, “Dynamic Modeling and Analysis of the Boring Machining System,” ASME J. Eng. Ind., 109, pp. 219–226.
Tewani, S. G., Switzer, T. C., Walcott, B. L., Rouch, K. E., and Massa, T. R., 1993, “Active Control of Machine Tool Chatter for a Boring Bar: Experimental Result,” Vibration and Control of Mechanical Systems, ASME, DE-Vol. 61, pp. 103–115.
Tanaka,  H., Obata,  F., Matsubara,  T., and Mizumoto,  H., 1994, “Active Chatter Suppression of Slender Boring Bar Using Piezoelectric Actuators,” JSME Int. J., Ser. C, 37(3), pp. 601–606.
Wong, B. W., Walcott, B. L., and Rouch, K. E., 1995, “Active Vibration Control Via Electromagnetic Dynamic Absorbers,” Proc., IEEE Conf. on Control Applications, pp. 868–874.
Chen,  S. G., Ulsoy,  A. G., and Koren,  Y., 1997, “Computational Stability Analysis of Chatter in Turning,” ASME J. Manuf. Sci. Eng., 119(4), pp. 457–460.
Chen,  C. H., and Wang,  K. W., 1994, “An integrated Approach Toward the Dynamic Analysis of High-Speed Spindles Part 2: Dynamics Under Moving End Load,” ASME J. Vibr. Acoust., 116, pp. 506–513.
Sridhar,  R., Hohn,  R. E., and Long,  G. W., 1968, “A General Formulation of the Milling Process Equation—Contribution to Machine Tool Chatter Research—5,” ASME J. Eng. Ind., pp. 317–324.
Sridhar,  R., Hohn,  R. E., and Long,  G. W., 1968, “A Stability Algorithm for the General Milling Process—Contribution to Machine Tool Chatter Research—7,” ASME J. Eng. Ind., pp. 330–334.
Tlusty,  J., and Ismail,  F., 1981, “Basic Non-Linearity in Machining Chatter,” CIRP Ann., 30(1), pp. 299–304.
Minis,  I., and Yanushevsky,  R., 1993, “A New Theoretical Approach for the Prediction of Machine Tool Chatter in Milling,” ASME J. Eng. Ind., 115, pp. 1–8.
Altintas,  Y., and Budak,  E., 1995, “Analytical Prediction of Stability Lobes in Milling,” CIRP Ann., 44(1), pp. 357–62.
Merchant,  M. E., 1944, “Basic Mechanics of Metal Cutting Processes,” J. Appl. Phys., 11, pp. 168–175.
Endres,  W. J., and Ozdoganlar,  O. B., 2001, “The Existence and Effects of Overlap Factors Greater than Unity and Less than Zero,” Trans. of NAMRI/SME,29, pp. 159–166.
Jensen,  A. S., and Shin,  Y.-C., 1999, “Stability Analysis in Face Milling Operations, Part 1: Theory of Stability Lobe Prediction,” ASME J. Manuf. Sci. Eng., 121(4), pp. 600–605.
Li, C.-J., 1999, “Tool-tip Displacement Measurement, Process Modeling, and Chatter Avoidance in Agile Precision Line Boring,” Ph.D. Thesis, University of Michigan, Ann Arbor, MI.
Endres,  W. J., 1996, “A Quantitative Energy-Based Method for Predicting Stability Limit as a Direct Function of Spindle Speed for High-Speed Machining,” Trans. of NAMRI/SME,24, pp. 27–32.
Tlusty, J., 1985, “Machine Dynamics,” Handbook of High Speed Machining Technology, R. I. King, eds., Chapman and Hall, New York, pp. 48–153.
Metzler, S. A., Bayly, P. V., Young, K. A., and Halley, J. E., 1999, “Analysis and Simulation of Radial Chatter in Drilling and Reaming,” Proceedings of DETC99: 1999 ASME Design Engineering Technical Conferences, Paper# DETC99/VIB8059, pp. 1–9.
Li, C.-J., Ulsoy, A. G., and Endres, W., 1998, “The Effect Of Tool Rotation on Regenerative Chatter In Line Boring,” Proc., Symp. on Dynamics, Acoustics, and Simulations, ASME IMECE, DE-Vol. 98, pp. 235–243.
Altintas, Y., Shamoto, E., Lee, P., and Budak, E., 1997, “Analytical Prediction of Stability Lobes in Ball End Milling,” The Phys. of Mach. Proc,—III, pp. 151–167.
Ozdoganlar,  O. B., and Endres,  W. J., 2000, “An Analytical Representation of Chip Area for Corner-Radiused Tools Under Both Depth-of-cut and Feed Variation,” ASME J. Manuf. Sci. Eng., 122(4), pp. 660–665.
Zhang, G., 1986, “Dynamic Modeling and Dynamic Analysis of the Boring Machining System,” Ph.D. dissertation, University of Illinois, Urbana-Champaign, IL.
Ehmann,  K. F., Kapoor,  S. G., DeVor,  R. E., and Lazoglu,  I., 1997, “Machining Process Modeling: A Review,” ASME J. Manuf. Sci. Eng., 119, pp. 655–663.


Grahic Jump Location
Block diagram considering the regenerative effect
Grahic Jump Location
Polar plots of (a) 1-DOF and (b) 2-DOF structural transfer function
Grahic Jump Location
Limiting cutting stiffness (tangential borderline) vs spindle speed
Grahic Jump Location
Stability lobes for boring with stationary and rotating boring bars, including effects of process nonlinearities
Grahic Jump Location
Tangential stability limits from the analytical solutions, using rotating-bar dynamic characteristics, compared to experimental results
Grahic Jump Location
Tangential stability limits from the analytical solutions, using stationary-bar dynamic characteristics, compared to experimental results




Some tools below are only available to our subscribers or users with an online account.

Related Content

Customize your page view by dragging and repositioning the boxes below.

Related Journal Articles
Related eBook Content
Topic Collections

Sorry! You do not have access to this content. For assistance or to subscribe, please contact us:

  • TELEPHONE: 1-800-843-2763 (Toll-free in the USA)
  • EMAIL: asmedigitalcollection@asme.org
Sign In