0
TECHNICAL PAPERS

Generic Simulation Approach for Multi-Axis Machining, Part 1: Modeling Methodology

[+] Author and Article Information
T. Bailey, M. A. Elbestawi

McMaster Manufacturing Research Institute, McMaster University, Hamilton, Ont, Canada

T. I. El-Wardany, P. Fitzpatrick

United Technologies Research Center, East Hartford, CT

J. Manuf. Sci. Eng 124(3), 624-633 (Jul 11, 2002) (10 pages) doi:10.1115/1.1468863 History: Received September 01, 2000; Revised December 01, 2001; Online July 11, 2002
Copyright © 2002 by ASME
Your Session has timed out. Please sign back in to continue.

References

Frain, G., 1992, Curves and Surfaces for CAGD, First Edition, Academic press, San Diego, CA.
Piegl, L., and Tiller, W., 1997, The NURBS Book, Second Edition, Springer, New York.
Marshall,  S., and Griffiths,  J. G., 1994, “A Survey of Cutter Path Construction Techniques for Milling Machines,” Int. J. Prod. Res. 32(12), pp. 2861–2877.
Bedi,  S., and Cohen,  E., 1994, “Toolpath Generation for Freeform Surface Models,” Comput.-Aided Des., 18, pp. 307–313.
Li,  S. X., and Jerard,  R. B., 1994, “5-Axis Machining of Sculptured Surfaces with Flat-end cutter,” Comput.-Aided Des., 26(3), pp. 165–178.
Held,  M., Lukacs,  G., and Andor,  L., 1994, “Pocket Machining Based on Contour-Parallel Tool Paths Generated by Means of Proximity Map,” Comput.-Aided Des., 26(3), pp. 189–202.
Elbert,  G., and Cohen,  E., 1994, “Toolpath Generation for Freeform Surface Models,” Comput.-Aided Des., 26(6), pp. 490–496.
Haung,  Y., and Oliver,  J. H., 1994, “Non-Constant Parameter NC Tool Path Generation On Sculptured Surfaces,” Int. Journal of Advanced Manufacturing Technology, 9, pp. 281–290.
Kim,  K., and Jeong,  L., 1995, “Tool Path Generation for Machining Free Form Pockets with Islands,” Computers and Industrial Engineering, 28(2), pp. 399–407.
Maeng,  H. Y., Ly,  M. H., and Vickers,  G. W., 1996, “Feature-Based Machining of Curved Surfaces Using the Steepest Directed Tree Approach,” J. Manuf. Syst., 15(6), pp. 379–391.
Chuang,  S., and Lin,  W., 1997, “Tool Path Generation for Pockets with Free Form Curve using Bezier Convex Hulls,” Int. Journal of Advanced Manufacturing Technology, 13(2), pp. 109–115.
Lee,  Y. S., 1998, “Non-isoparametric Tool Path Planning by Machining Strip Evaluation for 5-Axis Sculptured Surface Machining,” Comput.-Aided Des., 30(7), pp. 559–570.
Rao,  N., Bedi,  S., and Buchal,  R., 1996, “Implementation of the Principal-Axis Method for Machining of Complex Surfaces,” Int. Journal of Advanced Manufacturing Technology, 11, pp. 249–257.
Voelcker, H. B., and Hunt, W. A., 1981, “The Role of Solid Modeling in Machining-Process Modeling and NC Verification,” Int’l Congress and Exposition, Society of Automotive Engineers, pp. 1–8.
Chappel,  I. T., 1983, “The Use of Vectors to Simulate Material Removed by Numerically Controlled Milling,” Comput.-Aided Des., 15(3), pp. 156–158.
Anderson,  R. O., 1987, “Detecting and Eliminating Collisions in NC Machining,” Comput.-Aided Des., 10(4), pp. 231–237.
Jerrard,  R. B., Drysdale,  R. L., and Haulk,  K., 1988, “Geometric Simulation for Numerical Control Machining,” Proc. ASME Int’l. Comp. Eng. Conf., 2, pp. 129–136.
Wang,  W. P., and Wang,  K. K., 1986, “Geometric Modeling for Swept Volume of Moving Solids,” IEEE Comput. Graphics Appl., 12, pp. 8–17.
Wang,  W. P., 1988, “Solid Modeling for Optimizing Metal Removal of Three Dimensional End-Milling,” J. Manuf. Syst., 7(1), pp. 57–65.
Takata,  S., Tsai,  M. D., and Sata,  T., 1989, “A Cutting Simulation System for Machinability, Evaluation Using a Workpiece Model,” CIRP Ann., 38(1), pp. 417–420.
Takata,  S., 1993, “Generation of a Machining Scenerio and its Applications to Intelligent Machining Operations,” CIRP Ann., 42(1), pp. 531–535.
Spence,  A. D., and Altintas,  Y., 1994, “A Solid Modeler Based Milling Process Simulation and Planning System,” ASME J. Eng. Ind., 116, pp. 61–69.
El-Mounayri, H., Spence, A. D., and Elbestawi, M. A., 1996, “Enhanced CAD/CAM for Simulation and Optimization of 3–5 Axis Milling of Dies and Molds,” Proc. Conf. Of CSME, McMaster University.
El-Mounayri,  H., Spence,  A. D., and Elbestawi,  M. A., 1998, “Milling Process Simulation-A Generic Solid Modeller Based Paradigm,” ASME J. Manuf. Sci. Eng., 120, pp. 213–221.
Imani, B., 1998, “Model Based Die Cavity Machining Simulation Methodology,” Ph.D. thesis, McMaster University, Hamilton, ON.
Yang,  M., and Park,  H., 1991, “The Prediction of Cutting Forces in Ball-End Milling,” Int. J. Mach. Tools Manuf., 31(1), pp. 45–54.
Feng,  H. Y., and Meng,  C., 1993, “The Prediction of Cutting Forces in the Ball End Milling Process, Part 1: Model Formulation and Model Building Procedure,” Int. J. Mach. Tools Manuf., 34(5), pp. 697–710.
Armarego,  E. J. A., and Deshpande,  N. P., 1993, “Force Prediction Models and CAD/CAM Software for Helical Tooth Milling Processes, Part-I: Basic Approach and Cutting Analysis,” Int. J. Prod. Res., 31(8), pp. 1991–2009.
Armarego,  E. J. A., and Deshpande,  N. P., 1993, “Force Prediction Models and CAD/CAM Software for Helical Tooth Milling Processes, Part II: Peripheral Milling Operations,” Int. J. Prod. Res., 31(10), pp. 2319–2336.
Abrari,  F., and Elbestawi,  M. A., 1996, “Closed Form Formulation of Cutting Forces for Ball and Flat End Mills,” Int. J. Mach. Tools Manuf., 37(1), pp. 17–27.
Yucesan,  G., and Altintas,  Y., 1996, “Prediction of Ball End Milling Forces,” ASME J. Eng. Ind., 118, pp. 95–103.
Lazoglu, I., and Liang, S. Y., 1996, “An Improved Analytical Modeling of Force System in Ball-End Milling,” Proc. Conf. Of CSME, McMaster University.
Altintas,  Y., 2000, “Modeling Approaches and Software for Predicting the Performance of Milling Operations at MAL-UBC,” Mach. Sci. Technol., 4(3), pp. 445–478.
Lazoglu,  I., and Liang,  S. Y., 2000, “Modeling of Ball-End Milling Forces with Cutter Axis Inclination,” ASME J. Manuf. Sci. Eng., 122(1), pp. 3–11.
Lim,  E. H., and Menq,  C. H., 1997, “Integrated Planning For Precision Machining of Complex Surfaces, Part 1: Cutting-Path and Feedrate Optimization,” Int. J. Mach. Tool Des. Res., 37(1), pp. 61–75.
Chu,  C. N., Kim,  S. Y., and Lee,  J., 1997, “Feed-Rate Optimization of Ball End Milling Considering Local Shape Features,” CIRP Ann., 46(1), pp. 433–436.
Yazar,  Z., Koch,  K. F., Merrick,  T., and Altan,  T., 1994, “Feed Rate Optimization Based on Cutting Force Calculations in 3-Axis Milling of Dies and Molds with Sculptured Surfaces,” Int. J. Mach. Tool Des. Res., 34(3), pp. 365–377.
Zheng, L., and Liang, S. Y., 1995, “Analysis of End Milling Forces with Cutter Axis Tilt,” Transactions of NAMRI/SME, Vol. 23, pp. 137–142.
Kapoor, S. G., DeVor, R. E., Zhu, R., Gajjela, R., Parakkal, G., and Smithey, D., 1998, “Development of Mechanistic Models for the Prediction of Machining Performance: Model-Building Methodology,” CIRP International Workshop on Modeling of Machining Operations, No. 2, pp. 1–12.
Smith,  S., and Tlusty,  J., 1991, “An Overview of Modeling and Simulation of the Milling Process,” ASME J. Eng. Ind., 113(1), pp. 169–175.
Abrari, F., 1998, “MultiAxis Milling of Flexible Parts,” Ph.D. thesis, McMaster University, Hamilton, ON.
Yucesan,  G., and Altintas,  Y., 1993, “Mechanics of Ball End Milling Process,” ASME J. Manuf. Sci. Eng., 64, pp. 543–551.
Bailey, T. E., 2001, “Generic Mechanistic Modeling for Multi-Axis Machining,” Ph.D. thesis, McMaster University, Hamilton, ON.

Figures

Grahic Jump Location
Software routines for NURBS representation of cutting edge
Grahic Jump Location
Tool path representation
Grahic Jump Location
Control space definition
Grahic Jump Location
Variation of incut segments (semi-finishing, finishing)
Grahic Jump Location
1/2 Immersion incut segment limits
Grahic Jump Location
1/4 Immersion incut segment limits
Grahic Jump Location
Maximum cutting force (entire tool path)
Grahic Jump Location
Instantaneous cutting force
Grahic Jump Location
Maximum tool deflection (entire tool path)
Grahic Jump Location
Instantaneous tool deflection

Tables

Errata

Discussions

Some tools below are only available to our subscribers or users with an online account.

Related Content

Customize your page view by dragging and repositioning the boxes below.

Related Journal Articles
Related eBook Content
Topic Collections

Sorry! You do not have access to this content. For assistance or to subscribe, please contact us:

  • TELEPHONE: 1-800-843-2763 (Toll-free in the USA)
  • EMAIL: asmedigitalcollection@asme.org
Sign In